Control Line: Aerobatics
THIS YEAR'S VINTAGE Stunt Championships (VSC) were attended by one of the series' originators, Mike Keville. Mike has missed the last few events due to his job in Saudi Arabia. This time he was spectating, beaming at how mature the whole format has become. This is in great part due to the hard work of his wife Jo Ann, who has been directing the contest for some years. As I've stated many times, the essence of the weekend really transcends pure competition. However, there is competition if you want it. The fun-fly aspect brings out many different aircraft, flown by the original designers. This helps recapture the feeling of years past, and preserves the history of the event.
Control Line: Aerobatics
READERS OF THIS COLUMN will recognize Ron Burn as a master builder of near-scale Stunters. His latest, a Macchi, is an extraordinary example of his Scale techniques-both in finish and fidelity. This month I'll highlight the molded-component technology Ron used in this fine model. The wing is a true monocoque structure-a one-piece molded surface of carbon/balsa/carbon. All carbon is 1/2-ounce mat; the balsa is 6- to 8-pound 1/20 sheet. Other composite combinations were tried, including carbon/Kevlar, glass/glass, and Kevlar/Kevlar. The carbon/carbon combination had the best combination of strength and stiffness. The Kevlar was very strong, but not very stiff. The skin-molding process is fairly straightforward. A solid wing core is cut from dense (3-pound) blue foam, then re-cut .080 undersize. It's covered with one piece of .010 Mylar using 3M Super Spray Trim Adhesive, and is vacuum-bagged for 12 hours.
Control Line: Aerobatics
SAFETY IS ALWAYS a consideration, but sometimes it's more paramount than others. When we don't think about it, we become vulnerable to a variety of accidents that can potentially be life-threatening. Consider the control lines we use. Nothing could be more benign-or could it? Look in your kitchen-cheese cutters, egg slicers, and mushroom slicers employ wires as the cutting tool. In the wrong set of circumstances, you can be injured by the flying lines. The chance of this may seem remote, but a CL accident happened to a very experienced individual just a few years ago:
Control Line: Aerobatics
NOTED RC PATTERN columnist and competitor Dean Pappas once remarked that he tended to repeat subject material or touch on the same subjects every three or four years. A telephone conversation the other day prompted me to consider revisiting some simple troubleshooting procedures. Then I had a string of problems during a practice session that reinforced the idea! I was getting my airplane ready for the Nationals. I had just flown it in a contest and everything performed flawlessly, but I had to draw out some fuel to get the run-time down. This caused me to change my starting procedure, so I decided to construct a slightly smaller tank. Since I had just received one of Randy Smith's new Black Resin four-chamber resonator pipes, naturally I thought it was also time to try it.
Control Line: Aerobatics
Each Nationals seems to take on its own character, with neon paint schemes, checkerboards, and the like. This year's Nats at Tri-Cities, Washington July 10-15 was something else; there were so many different themes that instead of trying to select just one, I'll try to capture some of the more interesting ones. Foremost, we had more multiengine airplanes than ever-a total of three. These included Paul Walker's astonishing B-17. Equally impressive was another semiscale, a P-47N by Bill Werwage.

