Control Line: Aerobatics

This will be the last on the Brodak dope finishing projects. It's finally finished. This has been fun, but it consumes considerable time and energy. I wanted to carry this experience through because I really like the Brodak dope, and I highly recommend it. When I last discussed this, I was about to work the final finish with clear dope, ink, and the dry transfers. Every time I go through adding details, I marvel at how much time I put in, and how the details seem to blend away into the overall effect. The application of the clear dope is what I want to discuss. I'd used clear dope to build up the initial substrate, but I didn't know how much to use in the final overcoat application. I was looking for the minimum application that would cover all of the trim, ink, etc., and permit sanding to a flat surface. Then the intent was to recoat with more clear, sand with ultrafine paper, such as 2000 grit, and buff. My experience thus far was that it would take at least two application sets, so that's the way I started.

Control Line: Aerobatics

I haven't written about trimming in a while, so I thought I'd get into a very narrow subject that can seriously affect many other trim adjustments: the vertical center of gravity (CG). When I think CG, I usually focus on the fore-and-aft CG, which does have a big impact on flight characteristics. Having an airplane with the vertical CG not located in line with the leadout exit will prevent you from achieving the usual first step in the trim process; the leveling of the wings. Before I get too far, I'll explain what I'm considering. Your airplane is suspended by the leadouts. If there is a displacement of the vertical CG from the line where the extension of the leadout exit intersects the fuselage, there will be a force created that will pull on the fuselage. That pull will attempt to force the vertical CG into line with the leadouts when the model is flying. The force working on the fuselage naturally affects the wings so that if the displacement is just a little off, the wing cannot be leveled properly.

Control Line: Aerobatics

While I was participating in the annual contest lunch at the Memorial Day Houston contest, I was asked to put more in the column for the up-and-coming flier. In the past, I have run the gamut of topics, from flying to building-many subjects prompted by personal "adventures." My orientation has been to share technologies, sometimes in a series of columns, with the thought that readers could use what applied to them. Meanwhile, they were exposed to other information. Reflecting on that discussion in Houston, I've decided to periodically focus columns on the new fliers to help them get off to a good start. Suggestions for topics are welcome, as are pictures. The best place for beginners to start is to read everything available. It sounds elementary, but there has been an explosion of published information during the last 10-15 years.

Control Line: Aerobatics

EACH NATIONALS (Nats) has its own character. The contests have a way of defining themselves by the people who come to compete and be part of history. With the large number of overseas guests in Control Line Precision Aerobatics, this year's Nats had a distinct international flavor. US pilots were challenged at every level of competition. We are one of the few countries that permits competitors from other nations, and this broadens and enriches the week of competition. For the Open and Advanced fliers, the guts of the competition week began with qualifying rounds on Wednesday, July 14. All four of the "L-pad" paved circles are filled with competition. Judges are in teams that see one round of Open and one round of Advanced fliers.

Pages