Control Line: Aerobatics
THIS WAS ONE OF THE BEST Nationals (Nats) ever! The quality of flying was superb; the number of entries was up; the Intermediate skill class was flown for the first time; and the weather was wonderful. The International Aeromodeling Center (Muncie IN) is one of the premier sites in the world, and through the constant effort of the AMA staff, continues to improve. However, the real story of any Nat is the people and their progress in the competition. For the US F2B Control Line (CL) Aerobatics team, the Nats served as a showcase and a tune-up for the upcoming world competition in Kiev, Russia. Early in the week, the team, including Junior member Dondi Garrison, showed that it was well-prepared, and alternate Ted Fancher flew as well as he has in several years.
Control Line: Aerobatics
With the Nationals (Nats) still fresh, I thought I would comment on some of the more technical points of the competition that I didn't have space for in last month's coverage. There are some interesting approaches to getting the same high performance. In the higher placings, the performance level has been raised with the various "packages" that display exceptional "drive" in very light air conditions; the pilots were able to hit extremely hard corners and still have consistent, precise bottoms. That demands moderate-to-light models and a ton of horsepower under control.
Control Line: Aerobatics
With my latest project-to refinish Caudron 5-ongoing, I'm reminded of some covering procedures worth repeating. They fall in the realm of technique-subtle, but very important. I'm referring to getting the material that you are using to properly adhere to the surface of your pride-and-joy. A friend who was showing me his latest Stunter mentioned that he had problems with carbon veil rippling when he applied it to the fuselage. After we discussed how he had applied the material, I realized that point, and other covering materials techniques, could use revisiting. Since I introduced the covering techniques with carbon veil, I'll start there. The .2 ounce per yard is wonderful for covering sheeted/solid surfaces. One of its best properties is that it is inert and doesn't shrink, making it preferable to tissue in areas such as the vertical-stabilizer-to-fuselage joints, where tissue lifts.
Control Line: Aerobatics
MANY YEARS AGO, when I started building models, Veco kits and Sterling Ringmasters and Flying Clowns were the popular designs. In those days, the most difficult part for me was the control system; the Veco kits had the best representation of how to do it, and included many of the components. The Veco kits were expensive for the time at $6.95-about double the price of the profile kits, the Ringmaster and the Flying Clown. I recall the mystery of each new airplane's first flights. I thought that was just the way things were: sometimes they flew well, sometimes not. There wasn't much in print about how to trim airplanes, much less the modern technology on the trim devices.
Control Line: Aerobatics
This month I'm going to continue with assembling the typical Stunter, focusing on the wing/fuselage installation. But before I get to that, I thought I'd write a few words on why this is all so important-if not critical-to your latest creation. You might have heard the fervent wish to "build it light and straight." Well, to that I add, "better straight than light (within reason)," and here's why: If an airplane is built correctly, the chances are good that you will be able to trim it to fly reasonably well. An airplane that is out of alignment will never fly to its full potential, with compensating trim fighting the improper alignment. Many times I've let the mindset, "that looks good enough" overcome good sense. Only the correct alignment is acceptable on any model. Any time invested in ensuring that is justified.

