Control Line: Aerobatics

DURING THE LAST few years, I've mentioned the "History of Stunt" that Wynn Paul is developing with the help of many of our community. The scale is massive, and every contest is an opportunity for more photos to be donated, planes identified, and autographs rendered. Wynn's latest letter on the project status is full of contributors, along with a list of areas where more photos and information are needed. Wynn is still looking for scoreboard shots of the '48, '50, '51, '61, '62, and '65 Nationals and the 1965 FAI tryouts at Dayton, Ohio. He's also looking for pictures of Robert Dailey, Don Ferguson, Lou Andrews, Harold de Bolt, Robert Tucker ('47 winner) and Davis (Davey) Slagle. Photos of the Nationals, FAI, and World Championship from all years are always welcome.

Control Line: Aerobatics

I'VE JUST TAKEN a Warren truss/geodetic built-up wing off the cradle, and I'm really impressed with the construction method. In the technology series, I mentioned a wing construction technique invented by Bob Hunt called the Lost Foam Method. It involved creating a construction set by first using the root and tip templates of a chosen wing type (for example, Impact or Saturn) to cut a normal core set. This is the point where the technology extends. Instead of using the core as the basis of the wing to be sheeted, the core is marked with the desired rib locations and cut at those locations. These sections are then used to make rib templates. Now we shift focus a bit and look at the saddles, which in this application become the center point as the construction jig, plans, etc. The bottom cradles have the wing construction marked on them so that the wing is assembled in the cradles, pinned in place, and adhered with cyanoacrylate (CyA) glue.

Control Line Aerobatics

TO RUN A SETUP (ST .60, .46 piped engine etc.) to its potential, a flier really needs to find the potential problems, experience them, and develop procedures to minimize or eliminate them. For instance, there has been a lot of press about the benefits of tuned-pipe combinations. When correctly set up and maintained, the various combinations (O.S., OPS, Randy Smith Completion Aero) work extremely well. I really like the combination that I use (OPS .40 Spa with Smith/Werwage pipes), but it has taken a lot of work. The reality of engine combinations is that they all take work to understand how to make them perform under extreme conditions. You simply haven't "pushed the envelope" if you say that everything has worked with the same setting from the get-go.

Control Line Aerobatics

AS I'VE MENTIONED BEFORE, I make so many mistakes that they make good copy for the column. This time I'd like to reflect on the past building season for lessons learned. Hopefully, you'll find something useful so that you can improve your own "program." Philosophically, it's a good idea to honestly evaluate the season just completed, list what went right or wrong, and then figure out what goals to set for next year. As it turns out, the number-three Caudron I flew this year was a very good airplane with a few faults: it was a bit large at 750 square inches, and there were time when it wanted to pop out of maneuvers in heavy air. I really wanted to find out why an otherwise excellent airplane should occasionally manifest erratic characteristics.

Control Line: Aerobatics

FOR THE LAST SIX MONTHS, George Aldrich and I have been working with Willie Wylie to develop a turned-pipe Stunt engine based on Willie's very successful Fast Combat engines. His engines are examples of the finest craftsmanship. The path to a really good Stunt engine was not a direct translation from a 20-25,000 rpm Combat engine. We started with the basic timing of the OPS SPA, and from the very first flight, the prototype showed some very nice characteristics. The airplane used for the tests was a well-tested, competitive model that I have used for all my initial pipe testing. It is a large model at 710 square inches, 63-inch span, and 61 ounces. All the associated equipment such as pipe, header, fuel, prop, etc, were well known, so the engine was only variable in the test program. The goal was to develop an engine at least equal to the sweet-running OPS .40.

Pages