Control Line: Scale

SPOKED WHEELS: Have you ever wanted to build a vintage biplane for the Sport Scale event, but haven't done so because you could not find the proper size of spoked wheels? Bob Furr of the Orbiting Eagles of Omaha says you shouldn't put off building your dream plane of the Twenties or Thirties for the want of ready-made spoked wheels of a particular size, because with a little effort they can be made right in your own workshop. Start construction of the wheel with a disk of hard balsa having the diameter and about 2/3 the thickness that you would like the finished wheel to be. Glue 3/32-in. disks of aircraft plywood to each side of the center disk, and then add soft balsa outer disks. The outer balsa disks should be thick enough to make the wheel its full thickness when finished.

Control Line: Scale

RULES are a never-ending source for discussion. Just when you think you understand them fully, someone comes along with some questions and ideas to put you back to square one. Such is the case with several questions posed in a recent letter by Bill Michaels of Newport News, VA. As a matter of fact, several letters passed between Bill and me, and there was also one to Dave Platt, our Scale Contest Board chairman, in an effort to arrive at some reasonable answers for Bill's questions and ideas. The ideas and questions posed by Bill were mostly related to documentation of scale operating features and the idea of a Scale model C-47 towing a troop glider, as the prototype did during WW II.

Control Line: Scale

WORKING canopy parts can add a great amount of realism to your Scale model and can also help to get you a better point score in the Fidelity to Scale and Workmanship categories during competition. The information to follow came about as the result of a letter from Daniel deG. Strong of Ormand Beach, FL, who asked for specific details concerning the operation of the canopy hatch and windows of George Gaydos' P-38 featured in my June 1987 column (page 72). George gladly provided the details from which the accompanying sketch and description were made. As you can see in the sketch, the principle of operation of the canopy side window (shown in the down position) is basically the same scissor action used in our automobiles for raising and lowering the windows. While the sketch may be somewhat self-explanatory to some, a few words on the operation and type of materials used are still in order.

Control Line: Scale

REPLICA, the newsletter of the National Association of Scale Aeromodelers, is once more being received by NASA members. Stan Alexander, its new editor, has indicated that four more issues would be published by the time you will be reading this column. The May 1987 issue had a couple of items I would like to call to your attention if you are not already a NASA member. The first is to inform you that NASA has, for all new memberships, a Scale Data Source listing that provides names and addresses of many organizations, both government and private, from which drawings and photos of full-scale aircraft may be obtained.

Control Line: Scale

ELECTRIC and electronic control systems for CL Scale models have been covered to some degree in this column over the past few years, and a couple of letters received recently have prompted me to revisit the subject. This time my comments are based on letters from Mike Gretz (Montezuma, IA) and Jerry Blaszczyk (Beasalem, PA). Mike's letter was actually a copy of a response to Dale Campbell (Newton, NC) in which Mike outlined the history of CL electronic systems and the basics of their operation. Mike thought this information might be of interest to some of our newer CL Scale modelers. The letter from Jerry was about an electric relay system he uses for operating the flaps on his P-68 Victor, an Italian-made commuter plane.

Pages