Control Line: Scale
ROTARY switch operation: From time to time, there is a need in our Scale models to perform a series of operations/functions that are not too easily accomplished by mechanical means, such as bellcranks. One method of performing a series of operations is via a rotary-switch system that can be made by the average Scale builder. The system can be used for turning lights off and on, actuating landing gear mechanisms, bomb bay doors, and just about any other item your imagination will allow. The system described below was used to turn landing and running lights on and off and to open and close bomb bay doors.
Control Line: Scale
ONE of the most pleasing sights with respect to our model airplanes is, upon takeoff, to see the landing gear retract as the model climbs for altitude. Then, after a flight, to see the gear extend while the plane is on its final approach toward touchdown. At one time, gear retraction was employed by only the most adventurous of modelers, but today, with all the various ready-made and reliable systems, the gear-retraction feature has become commonplace. There is, however, one part of the retract operation which can be really troublesome-that is the closing of the wheel well doors, if employed on the model you have chosen. Such is the case of Charles Hanson (Zion, IL) who has chosen the Top Flite P-39 Airacobra and is installing retracts for the first time.
Control Line: Scale
LAST month, I presented information on a possible way of operating the wheel well cover doors of the main landing gear of a Top Flite P-39 Airacobra. I would now like to complete the item by presenting a method of closing the nose wheel landing gear wheel well cover doors of the same plane. I would like to start by reminding you that the retraction system used was a Rom Air, and that the nose wheel landing gear mounting was modified considerably from that shown on the Top Flite kit plans. Referring to the accompanying sketch, you will note that the retract unit is mounted on hardwood beams. The beams are made of 1/2-in. square motor mount material and were mounted at an appropriate height between formers F-2 and F-5 of the Top Flite model. The beams not only provide the mounting vehicle for the Rom-Air unit but also provide a means of mounting the mechanism used for closing the wheel well cover doors. It should be noted that the space, about 1/2-in., between the beams is a result of mounting the Rom-Air unit and should provide sufficient space for a 2 or 2 1/2-in. nose wheel, when retracted.
Control Line: Scale
NEW WAYS. One of the objectives of this column is to present as many ideas as possible that will help the Control Line Scale modeler build and fly a better Scale model. Over the past few months, we have covered many building ideas, talked about scale documentation and rules changes, and how to perform various operational functions. In my February and March 1984 columns, I presented an electric servo system that allowed a number of functions to be performed through the use of electrified control lines and modified servos. The electric servo system, using three control lines, allowed the operation of two servos. The addition of a fourth line permitted the use of a third servo. While this system works, it is dependent on the use of multiple lines which, when going beyond the three we are accustomed to using, becomes cumbersome.
Control Line: Scale
THIS will be the last of my monthly columns for 1984, because the December issue of MA has been set aside for coverage of this year's Nationals. I hope that all who had expectations of winning have done just that and will find their names on the winners' list. I am also sure that Roland Baltes, who will be covering CL Scale at this years Nats, will do an excellent job of reporting. Before getting into any particular column material, I would like to cover some miscellaneous items.

