Control Line: Scale
GROUND HANDLING and setting up your model for proper ground tracking was presented in the August 1997 column; Grant Hiestand told us of the importance of proper ground handling and how to accomplish it. During the next couple of months, I will explore ideas from Fred Cronenwett, my West Coast reporter, about throttle control and test flying (especially for new Scale models). Throttle Control: While some of this may be old hat to some readers, I am sure that there are newcomers to aeromodeling, especially to Control Line (CL) Scale, who might benefit from a few words on the basics. Who knows? Maybe some of the Old-Timers might even find it interesting. Some CL models, such as those flown in Speed and Combat, use engines with a fixed venturi and needle valve, and run at a fixed rpm (until the fuel supply is gone), other models, such as those flown in Navy Carrier, Scale, and Sport flying, have throttle control. Throttle control is possible when the engine is equipped with a carburetor that allows the venturi to be opened and closed, metering the air/fuel mixture and giving control of the engine rpm. Such is the arrangement you want for Scale models.
Control Line: Scale
Test Flying (continued): In the August and October columns, I talked about setting up Scale models for proper ground handling, throttle control, and taxiing, and I have progressed to the point of getting the model into the air. I'll continue the discussion with the Flight Glide (required number of laps if in competition), and getting that super-special project safely back on the ground. Now that you know that you can fully control the aircraft's engine and successfully get the model airborne, consider how the model will react. (If it is properly powered, you should have gotten it airborne without having to apply full throttle.) Keep it airborne, but only two or three feet above the ground. That gives you an opportunity to evaluate the model's stability, and a short distance in which to get the model back on the ground in case of emergency.
Control Line: Scale
THE P-39Q COBRA II was one of two Airacobras flown in the mid-1940s at the Cleveland Air Races. Cobra I was flown by Jack Woolsams in August 1946, and was lost above Lake Ontario after qualifying for the Cleveland Air Races. The P-39Q Cobra II, flown by Tex Johnston, qualified for the same 1946 races and went on to win the Thompson Trophy. Both models had been stripped of military components, were lightened, given better-rated engines, and the original three-bladed propellers were replaced with four-bladed props. The Cobra II raced again in 1947 and 1948 (it reached 471 mph in 1948). It was flown after that until 1969, when it crashed during an attempt to break the propeller-driven speed record.
Control Line: Scale
SCALE FAI Team Selection: Cathy Burnstine reported that the FAI (Federation Aeronautique Internationale) Control Line Scale team selection for 1998 was completed at the AMA International Aeromodeling Center, Muncie IN, July 7-9, 1997. The team of Steve Ashby, Jack Sheeks, and Ralph Burnstine will represent the US in the World Championships, which will be at Pretoria, South Africa in April 1998. Dale Campbell and Charlie Bauer are alternates for the team, and Darlene Frederick was elected team manager. Cathy noted that static judging was held poolside at the Ramada Inn (Muncie) on Monday, July 7, and that the weather was beautiful until the flying portion of the competition was scheduled to start. Tuesday brought in winds at a steady 18 mph with higher gusts, which made flying difficult. The first three flights of the day ended rather abruptly with damage, ranging from the destruction of Jack Patrolia's Pitts to minor damage to the bottom of Jack Sheeks' Hellcat. Charlie Bauer lost control of his Electric-powered Cub, but was able to repair the damage and return to the competition the next day.
Control Line: Scale
SUCEAVA IS a quaint town in the northeast corner of Romania that is surrounded by hills, mountains, and large forests. Townspeople use the Suceava River, which runs through the village, for swimming and fishing. Families farm and raise fruits, vegetables, and various farm animals on the outskirts of the town, which is known for several historical sites, including monasteries, churches, and ruins of cities dating back to the 14th century. You might wonder, "What does Suceava have to do with CL (Control Line) Scale?" It's where the 1997 European F4B & F4C (CL and RC [Radio Control]) Scale Championships were held. Piotr Zawada (Poznan, Poland), who has contributed accounts of foreign activities to this column, sent this month's photos and results of the CL portion of the competition.

