Control Line: Scale
SCALE SCRATCH-BUILDING from paper may seem like a far-out way to construct a Control Line (CL) Scale model for competition, but that is what Ken Long of Whittier, California does. If you have been following this column, you might have seen photos of Ken's "cardboard" Ju 87D Stuka dive-bomber that is built almost entirely of various types of paper. Balsa was used only in places such as the tips of the wing, rudder, or elevators that would have been extremely difficult to shape out of cardboard. Ken's Stuka has served him well; it has been flown more than 50 times, and has been in the winner's circle of local, regional, and national competitions.
Control Line: Scale
BUILDING WITH PAPER: In last month's column I introduced you to Ken Long's approach to scratch-building a Control Line (CL) Scale model using readily available corrugated cardboard and card stock material. This month I will provide you with some ideas on construction. Ken told me that there are two basic types of fuselage construction that work well with paper: "cross frame" and "box frame." For the purposes of this column. I'll assume that you have a full-size set of plans for the airplane to be modeled.
Control Line: Scale
BUILDING WITH PAPER with Ken Long of Whittier, California has been the main subject of my past two columns. I covered the types of corrugated material and card stock that can be used for more than 90% of scratch-built Scale models' construction. I also described the basics of putting such models together, and the glues that should be used. I'll conclude this series with information about covering the models' structure and applying surface details, such as rivets and access panels, as the covering is applied-something not easily done when using the more traditional methods of covering with balsa, silk, or silkspan.
Control Line: Scale
CL (CONTROL LINE) Scale rules proposals for 1999 have gone through the final vote of the Scale Contest Board. The passing of proposal SC-99-21 provides removal of the word "Supplemental" from the "Control Line Profile Scale" heading. While the proposal did not say so, I presume that Profile Scale has been upgraded from "Supplemental" to "Official" event status. Proposal SC-99-20 also passed the final vote, and established two divisions for the Profile Scale event. "Division #1" will be for the "novice" contestant only, and is to be used as an entry level CL Scale event. "Division #2" is open to any contestant who has had previous CL Scale competition experience.
Control Line: Scale
NEW ELECTRONIC CL HANDLE: A new electronic control handle is being developed by Bill Young of Flagstaff AZ. Bill is an avid Electric modeler and has been making electronic devices for RC, FF, and CL. The new handle combines the benefits of the centering adjustment capability of the standard Stunt handle, and the incorporation of an electronic control system that is becoming very popular among Scale and other Control Line modelers. The accompanying photo shows a prototype of the new handle, which includes the following features: Convenient line adjusting capabilities (wing nut at the center of front bar of the handle) for setting perfect neutral positioning of the model's elevator, and a three-channel electronic system.

