Control Line: Scale
FUN SCALE, TEAM SCALE, and other ways of promoting Scale activity were the subjects of the September column; ideas came from Bill Reynolds (of the New Jersey's Garden State Circle Burners) and Fred Cronenwett (of the West Coast's 101st Screaming Eagles). A report from Bill Reynolds noted that the Circle Burners tried fun scale events at their April 1995 Profile Scale meet and their June 1995 Carrier meet. The April meet drew 16 entries; 9 of which were in fun scale. The June meet's fun event also brought out 9 entries. A good beginning. Reynolds noted that the Scale purist may not agree with such events, but this type event is starting to bring out more entrants-especially those that haven't previously tried their hand at Scale contest activity. The object of these fun-type events is to introduce the newcomer (and not-so-new modeler) to Scale activity-without the pressure that usually accompanies a full-blown Scale meet. The main theme here is having some fun while trying something new (and perhaps even going home with an award).
Control Line: Scale
MAKING PINKED-EDGE RIB TAPE from silkspan or paper to simulate the rib-stitching covering on fabric-covered models was mentioned in last month's Workshop Hints. The process involves using the saw-toothed metal strip that's found on waxed paper and plastic wrap boxes. One problem involves how to hold the flimsy steel edge while making the pinked-edge tape strips. The solution for holding the metal strip (and the paper from which the tape is made) is shown in the accompanying sketch. The idea for this tool originated with the Chicago Scale Masters Club back in the 1970s; it was featured in this column in November 1984. That was more than 11 years ago, so I thought we might revisit the subject and provide the information to some of our newer Scale modelers.
Control Line: Scale
A QUESTION ANSWERED: In my November 1995 column I included a picture of Norm Skuderin's P-51C Mustang air racer, Beguine. While we had some information about the airplane's unique configuration (wing-pod coolers were added, and the lower fuselage air scoop was removed), the "who and why" of the unusual paint scheme was in question. I asked if anyone could supply more information about the paint scheme. The response was great! I have taken the following responses from the several I received. While J.D. Reed (a top Beechcraft distributor and avid race fan from Houston, Texas) was the driving force behind the procurement and development of the Beguine racer, it was Walter Beech (a highly successful designer of commercial aircraft) who provided the major design work. Beech was responsible for removing the lower air scoop and placing the coolers in the wing pods.
Control Line: Scale
AVIATION MUSEUMS can be great fun to visit, and are fine sources of Scale documentation. In a recent issue of Replica, the newsletter of the National Association of Scale Aeromodelers (NASA), Mike Welshans told of his visit to modeling friend Bill Logan in London, Ontario, and the Canadian National Aviation Museum located in Ottawa, Ontario. The museum is approximately 80 miles north of the US border, and approximately 175 miles north of Syracuse-it's within easy reach of most northern locations in the Midwest and eastern United States. Ottawa is also the home of the Parliament buildings which are most interesting to visit, especially if you catch the changing-of-the-guard ceremony. Mike noted that the museum has 109 aircraft, from the dawn of Canadian aviation to present-day jet fighters. There are 47 aircraft on permanent display inside the museum, and eight on display outside. The remainder in a storage area awaiting restoration.
Control Line: Scale
CONTROL SYSTEMS-especially our three-line handles-have been talked about at great length. However, it appears that we have ignored, or perhaps not thought too much about, one very important factor: how to make adjustments or compensate for uneven flying lines on model leadouts. Most of us do our best to make all of our flying lines the same length, and to make bellcrank leadouts to the specific lengths required for the three-line bellcrank and handle we're using. However, it seems that no matter how hard we try to be exact, we can always count on a line or leadout being off just a bit. We want our lines to be exact so that the throttle control works well, and so we have a good neutral elevator position. It's very disconcerting to have to keep a little up or down control on the model to keep it in level flight. A comfortable feeling at the handle makes for a better flight.

