ST. LOUIS F2A
WORLD CUP
Preparing for the F2 World Championships in Muncie, Indiana
Fred Cronenwett
clsocale7@gmail.com
Photos provided by the author

Control Line (CL) Speed has many events under the AMA rules, but worldwide, the FAI rules have F2A Speed. F2A Speed is flown in many countries, including the US. In August 2024, the FAI F2 World Championships for CL Model Aircraft are coming to Muncie, Indiana, including F2A Speed.
The F2A World Cup is where the pilot flies in three or more World Cups and the three best scores get added together to come up with a final score. The pilot with the highest number of points wins the F2A World Cup. The three World Cups have to be flown in different countries; this is why we host the US and Canada World Cups, allowing pilots to enter two World Cups with one trip.




After the nine laps are complete, a signal is given to the pilot, allowing them to pull the handle from the pylon, shut down the engine, and land.
An official flight starts when the handle goes into the pylon and the nine airborne laps are complete. The computer system will allow the pilot to know the speed for each of the nine laps. The computer timing system will record whether the model is increasing in speed from lap one to lap nine or staying constant.
The FAI judges under the timer’s tent are looking for several items. First, they watch for when the handle goes into the pylon and when it comes out. The flying height of the model is also judged by the vertical white board with the low and high lines.
Watch the video of Alex Valishev flying his F2A model that I have posted on my YouTube channel, listed in “Sources.” The model is not released right away; he is waiting until the motor sounds just right, and then he has to get it airborne. There is a noticeable change in the rpm and sound of the engine as it comes up to full rpm with the tuned pipe.
There are times during practice when the motor just does not sound right and the pilot will shut down the motor to change some settings. F2A models that are flown today are not flown for fun or just general flying. F2A competition requires attention to the smallest of details. The entire model needs to be set up correctly—from the engine to the aerodynamics of the model—to have a winning combination.
The pylon is a metal post that the handle can hook into to maintain a perfect center point for the flight, and it also holds the line tension. The circle must be set up for a pylon and there are FAI rules on how much it can move under load. If you watch the pilot during


03. Yuri starts the process to get the motor up to full rpm. The pilots will hang onto the pylon throughout the entire flight.
04. Alex releases Matthieu’s F2A Speed model.
05. The F2A Team trophy.
06. The 2022 F2A team with the Leonardo F2A Team Cup. (L-R): Patrick, Bill Hughes, Ivan Valishev, and Alex.
07. The model is loaded on a dolly that drops away. This particular model was used as a trainer to become familiar with the process of getting the model at full speed and the handle in the pylon.



the flight, they hang on to the pylon, so it has to be very secure.
Most people are surprised when they find out that the fuel used is composed of 80% methanol and 20% castor oil. There is no nitro in the FAI fuel. The motor turns in excess of 30,000 rpm.
Alex is the current 2022 F2A world champion and lives in the US. In 2022, the US team also took first for the F2A team award at the world championships. Alex set a new F2A speed record of 308.8 kph at that event. The F2A World Championships are held every other year, so in 2024, they will be held in Muncie.
The US also won the F2A Team award back in 1960, and then again from 1964 through 1970.
Alex won the F2A World Cup in 2021 and 2022. His son, Ivan Valishev, was the Junior F2A World Cup Champion in 2021 and 2022.
I have videos on my YouTube channel showing how the flights are accomplished and just how fast they fly. Alex had the fastest flight at 307.4 kph (190 mph). He also holds the AMA record for F2A Speed.
After every round, the pilot takes the model back to the pit area and cleans out the engine, pipe, and other parts and prepares it for the next round.
We were also honored to have Carl Dodge, the 1990 and 2014 F2A world champion, come to the World Cup. Carl is an AMA Model Aviation Hall of Fame member and has been flying CL Speed for many years. Because of our facility at Buder Park, with the fenced-in Speed circle, the venue can easily host the event.
The equipment to run a contest for F2A Speed is specialized and the models also require special equipment. The altitude of the flying site, barometric pressure, temperature, and humidity are very important to these pilots. They know, based upon the current conditions at the flying site, how to set up the model for the best possible speed based upon previous flights.
To determine the speed of the model, an optical TransiTrace device is used. Two units are positioned on the outer edge of the circle and they point toward the pilot. These units are hooked up to a computer that has a program to measure how fast the model is flying. It will record the speed in kph for each lap, and then an overall flight speed. As the model passes by the sensor, it triggers the timing of each lap.
The pilots who entered the 2023 World Cup at Buder Park, representing France, Germany, Canada, and the US, included Matthieu Perret, Patrick Hempel, Dave Rigotti, Paul Gibeault, Bill Hughes, William Naemura, Alex, Yuri Shveden, and Ivan.


If you attend the 2024 F2 World Championships on August 11-17, you can watch CL Aerobatics, Combat, Racing, and F2A CL Speed.
Turn left and go fast!
SOURCES:
Fred Cronenwett’s YouTube Channel
www.youtube.com/@clscale
Lafayette EsquadriIle
www.lafayetteesquadrillecl.wordpress.com
Greater Saint Louis Model Association
http://gslma.com/buder-park








