Control Line Aerobatics
WHEN I STARTED modeling in the late 1940s, we builders didn't think too much about what to paint our airplanes with; it was nitrate-based dope with butyrate dope over it for fuel-proofing. The early brands were Testors, Speed-o-Laq, AeroGloss, and other locally produced or packaged materials. Most brands worked reasonably well as long as you kept the butyrate over the nitrate; they worked well enough so that the process was just "there," working. The advent of many high-performance automotive materials made them the "in" finishes; they were self-leveling, highly fuel-resistant, and beautiful. However, they did not come without potential problems-most were multipart and highly toxic. They required that the user wear protective garments and a special mask with an outside air source.
Control Line: Aerobatics
On President's Day weekend, the Dallas Model Aircraft Association (DMAA) hosted a Stunt [Precision Aerobatics] Forum and contest. After many years of envying the wonderful forum hosted by the Garden State Circle Burners club, I really looked forward to this inaugural happening. I'd seen several of the Windy Urtnowski tapes on the Garden State Circle Burner forums, enjoyed them, and I recommend them. Chief organizer Tom Niebuhr, with DMAA President Mike Scott, did a superb job of organizing the presentation and keeping the proceedings moving throughout the day. The list of forum topics was varied, ranging from designing a semiscale Stunter, to designing a Stunt paint scheme, to various construction tips and tools. Since I can't recount all of the presentation, I'll pass on some of the tips that I thought were of value.
Stanzel Museum
There's a small farming community just off of Interstate 10 in Southeast Texas. Most of you have probably never heard its name: Schulenburg. For more than 50 years, Schulenberg has been the home and strength to Victor and Joe Stanzel, unique engineers and entrepreneurs. Although some of us know their contributions to aeromodeling, few are aware of the variety of their lives' work. Joe and Victor have passed away, but as a tribute to their spirit, their family established the Stanzel Model Aircraft Museum and the Stanzel Family Foundation. The family hosted the Museum's grand opening this year on March 28, and it is open to the public. It provides a grand tour through the highlights of two interesting lives. Victor Stanzel was fascinated with aviation from childhood. He would often stop plowing on the family farm to watch private airplanes and military aircraft that flew over Schulenburg in the early 1900s.
Control Line: Aerobatics
Several columns ago, I discussed the value of refinishing a good-flying airplane. I had decided to refinish my number-four Caudron and use it as a test project for the new Brodak butyrate dope. In another previous column, I discussed how to strip the airplane down to bare wood. From there, I started the process of preparing the bare structure. With any refinish, somewhere are areas that require repair prior to recovering. After I block-sanded everything carefully, I restored the surfaces. This is the easiest point in the process to make the lightest repair.
Control Line: Aerobatics
This month I'm going to continue with assembling the typical Stunter, focusing on the wing/fuselage installation. But before I get to that, I thought I'd write a few words on why this is all so important-if not critical-to your latest creation. You might have heard the fervent wish to "build it light and straight." Well, to that I add, "better straight than light (within reason)," and here's why: If an airplane is built correctly, the chances are good that you will be able to trim it to fly reasonably well. An airplane that is out of alignment will never fly to its full potential, with compensating trim fighting the improper alignment. Many times I've let the mindset, "that looks good enough" overcome good sense. Only the correct alignment is acceptable on any model. Any time invested in ensuring that is justified.

