Author: Rich Hanson

Edition: Model Aviation - 2024/02
Page Numbers: 4, 5
Portrait of Jim Richmond

JIM RICHMOND: AVIATION STATESMAN OF THE YEAR

By Rich Hanson, AMA President | richh@modelaircraft.org

Portrait of Jim Richmond

ON NOVEMBER 8, 2023, the National Aeronautic Association (NAA) announced the 2023 recipients of the Wesley L. McDonald Distinguished Statesman and Stateswoman of Aviation Award. Once again, this recognition included a member of the aeromodeling community.

In the past two years, the aeromodeling community has been fortunate to have one of its members named as Distinguished Statesmen and Stateswomen of Aviation. In 2022, Hazel Sig-Hester was recognized as a Distinguished Stateswoman of Aviation for her lifetime support of model aviation and her overall contributions to aviation. This year, aeromodeling champion Jim Richmond, from Flower Mound, Texas, was included in the 2023 class of the Wesley L. McDonald Distinguished Statesmen and Stateswomen of Aviation.

Composite image of the 2023 McDonald Distinguished Statesmen of Aviation honorees
Aeromodeling champion Jim Richmond (center, R) was recognized as a 2023 Distinguished Statesman of Aviation.

The NAA’s board of directors established the Wesley L. McDonald Distinguished Statesman and Stateswoman of Aviation Award on October 16, 1954. The award honors outstanding, living Americans who, through their efforts over an extended period of time, have made significant contributions to aeronautics and reflected credit upon America and themselves.

Previous recipients of this award include Chuck Yeager, Olive Ann Beech, Clay Lacy, and Marjorie and Katherine Stinson.

NAA President and CEO Amy Spowart commented, “The history of aviation is marked by great people who have impacted the industry in extraordinary ways with their life’s work. This award serves to recognize these remarkable people. This year’s awardees represent excellence in vital industry sectors. From safety to leadership and beyond, this distinguished group is excellence personified, and we are honored to recognize them and their contributions to aviation.”

The 2023 honorees are Gregory A. Feith, for his lifetime achievements as an aviation safety expert, champion of best practices, and advocacy elevating aviation safety awareness and training for the next generation; Wilson Leach, for his extraordinary dedication to serving the aviation field over more than half a century and perseverance in nurturing Aviation International News from a small publishing company into an industry leader; Jim Richmond, for significant advancements in aviation, earning hundreds of aero sports awards, inspiring youth into aviation-related careers, and serving the US as an aero sports competitor and in the military; and Robert Stangarone, for his nearly five decades of skilled leadership as a communicator, strategic thinker, journalist, and chronicler of aviation history.

Contributions to Jim’s nomination for the award were kindly provided by Leo Pilachowski of Bloomington, Indiana; National Free Flight Society (NFFS) President David Lindley; and AMA Executive Director Chad Budreau. The following are excerpts from the nomination dossier:

“In over eight decades of designing, building, and flying model aircraft, Jim Richmond has achieved unsurpassed accomplishments in both breadth and level of international and national competitions. Jim did more than just compete during these eight decades. Jim has given back to model aircraft sport aviation by supporting, with materials, mentoring and friendship, fliers old and young in countries ranging from the United States to Romania to Japan. In 1987, the FAI awarded Jim with the Paul Tissandier Diploma, recognizing Jim’s distinguished service to international sport aviation. Previously, the AMA’s 1984 Distinguished Service Award was presented to Jim.

“After serving two years in the Navy as an electronics technician, Jim started an engineering career and has 33 patents. This was the background for the many innovations Jim introduced to the sport of model aviation. For Jim’s jet Control Line (CL) Speed models, these innovations included much reduced frontal area and extensive streamlining. In addition, Jim introduced the asymmetrical design with most of the wing and stabilizer area on the left side of the speed models to take advantage of the lower air speed on the inside of the travel circle.

“Today, over 70 years later, CL Speed models still use these concepts. Jim was even more innovative with his Indoor Duration models. For example, Jim was instrumental in the use of boron fiber to increase the stiffness and strength of the balsa model structure with little or no increase in weight. Jim was also a leader in replacing many metal and balsa components with carbon fiber and epoxy composites. To replace heavy tissue paper and fragile microfilm (a dried film of model airplane dope), Jim was a leader in using ultrathin half micron (20 millionths of an inch) polyester film for airfoil surface covering.

“To his credit, Jim shared these innovations with his competitors and other fliers. Moreover, Jim did more than just share techniques and display his models during contest events. Jim made available detailed plans of his models and wrote many articles about the building techniques and materials used. Additionally, the good balsa wood and rubber needed to be competitive were not always readily available. Jim worked to make these material sources known and available to all fliers. Jim continued such efforts for over six decades.

“In the late 1990s and later, when more advanced materials including excellent motor rubber, the thin polyester film, boron fiber, and carbon fiber were commercially available, Jim, and others, made the effort to make sure fliers in other countries could obtain the materials. Jim and his wife, Mariana, even donated a great deal of the new materials, including some of the best but rare motor rubber, to fliers who did not have the hard currency to purchase the materials. Most of the donations went to fliers in Eastern Europe and, in particular, to the Romanian junior team fliers.

“In the US, Jim mentored many younger fliers on the US Junior team. In particular, Jim mentored Doug Schaefer (Junior World Indoor Duration world champion in 2002 and 2004 and US Senior team member in 2006 and 2008) and Brett Sanborn (runner-up 2004 Junior World Championship, US Senior team member 2006, 2010, 2012, 2014, and 2016, and Indoor Duration Senior world champion in 2018).

“For the past five decades, Jim competed exclusively nationally and internationally in the model aviation sport of Indoor Duration. This was Jim’s most innovative and successful model aviation period. Jim represented the US as a member of the US team in 15 FAI world championships which are held every other year. Jim placed first in eight of these championships and finished on the podium five other times.

“During Jim’s seven decades of flying model aircraft, he has been an ambassador for the sport by sharing his knowledge, mentoring younger fliers, and making numerous friends worldwide. He has shared his skills and supplies with young fliers both in the US and internationally.

“During the slack contest times (and sometimes the not-so-slack times), Jim was always available to interact with a wide range of spectators and spread the excitement of model flying (yes, even Indoor Free Flight flying can be exciting as well as slow). Jim is a true statesman of the sport and aeronautics in general.”

Sadly, Jim passed away on December 15, 2023. Our sincere condolences to Mariana, his family, and his friends. A memorial service is planned for the Jim Richmond Open in West Baden, Indiana, in April.

Keep ’em safe, keep ’em flying, and continue to enjoy this great hobby!

Jim Richmond with his wife Mariana
Eight-time FAI world champion, engineer, and World War II veteran Jim Richmond with his wife, Mariana. They have been married for 48 years. They met at the 1970 FAI World Championships. The photo was taken at the annual Jim Richmond Open aeromodeling event, named in his honor.