Edition: Model Aviation - 2022/12
Page Numbers: 30, 31, 32, 33, 34
Full view of a scale RC Hughes 500C helicopter in flight
Close-up of a scale RC helicopter cockpit with two pilot figures
A Vario 1/5-scale Hughes 500C. Vario Benzine mechanics were converted to electric power using a Scorpion Power System 5035 motor and Castle Creations 160HV ESC with a 12S LiPo battery.
Full view of a scale RC Hughes 500C helicopter in flight
A Vario 1/5-scale Hughes 500C. Vario Benzine mechanics were converted to electric power using a Scorpion Power System 5035 motor and Castle Creations 160HV ESC with a 12S LiPo battery.

Scale RC Helicopters

Scale helicopters have come a long way

By Jon Michael Ellis
flyboy6191@yahoo.com
Photos by the author and as noted

I will start with a brief introduction. I am a retired full-scale helicopter pilot who became interested in helicopters in 1980 after seeing a small ad in Radio Control Modeler about a little .25-size fixed-pitch RC helicopter called a GMP Cricket. That small heli led me to a career in helicopter aviation.

After 35 years of full-scale flying, I now get my helicopter enjoyment in the wonderful world of building and flying RC Scale helicopters. My passion in this great hobby is to share information with both new and experienced modelers to achieve their goals in making their models look and fly as realistically as possible.

I saw my first RC helicopter in the early 1970s. It was a Schlüter Huey Cobra and the pilot could only hover for a few seconds at a time, but it sure looked like a lot of fun. I will always remember watching people learning to fly their models, and now I know why they were having such a great time.

Then

The middle 1970s was the introduction of pod-and-boom helicopters, and pilots were successful in learning to fly them. Modelers decided it was time to put their pod-and-boom helicopters into fiberglass fuselages to make them look like full-scale helis.

The fuselage kits of that era were bare fiberglass covered in mold release and full of pinholes that had to be filled and sanded many times before painting. The kits were supplied with a thin sheet of plywood and a few drawings of the formers, which had to be transferred to the wood with carbon paper and cut out with a scroll saw.

The choice of Scale kits was limited and included Jet Rangers, Long Rangers, Bell 222s, Hughes 500s, Bell Hueys, Huey Cobras, and maybe a couple more that I have forgotten. There were a couple of manufacturers that offered kits that included special mechanics, but most offered fuselage kits that were made to accept pod-and-boom mechanics.

If you wanted a cockpit or scale detailing, you had to make it yourself from pieces of plastic, wood and aluminum tubing, and anything else you could find that would resemble something on a full-scale helicopter.

Now

Now we have wonderful, smooth, pinhole-free, gelcoat fuselages that eliminate a lot of the preparation. Some even have the rivets and panel lines molded into the fuselage during manufacturing. They include laser-cut sheets of wood, where the formers pop out and, in most cases, are ready to install.

The sky is the limit with a long list of fuselage kits that represent most of the full-scale helicopters being manufactured. We now have Scale helicopters that are in many sizes, from small, 12-inch rotor spans to some with more than 100-inch spans. There are Scale helicopter kits available for any budget.

With the introduction of fiberglass, carbon fiber, and even aluminum blades, we no longer have to sand, cover, and meticulously balance wood blades. Most are ready to fly, with blades that require little balancing.

We now have 3D printing and, again, the sky is the limit. If you have the need for scale detailing, you can purchase a 3D printer and either purchase the print files or design your own. There are companies that will take your idea and make the parts at a reasonable price.

Companies such as Scale-Print, in Germany, make complete cockpits and scale parts that are hard to distinguish from the full-scale ones.

Powerplants

The only power sources available in the early years of Scale helis were nitro and gasoline, and both put limits on how much scale detailing you could add because they were limited in power. You had to leave a lot of the windows out to cool the engines. There were no electric-powered Scale models available.

Jump ahead to today and things have changed. It was in roughly 1999 that electric-powered RC

Pilot seated in the cockpit of a Vario 1/6-scale Bell 47
In this Vario 1/6-scale Bell 47, the cockpit is completely scratch-built by the author. The pilot came from BlackOpsToys and the passenger from eBay.

helicopters were introduced. At that time, modelers were using heavy NiCd batteries. At first, they were just a novelty, but soon, the modeling community started using LiPo batteries and the RC industry really became exciting for helicopters.

I don’t hesitate to say that 90% of our helicopters are powered by electric motors. There are still a few gasoline- and nitro-powered models flying, but they are few in number because of the introduction of electric motors and turbine engines.

I am not well-versed with the use of turbine engines in RC helicopters, but they have a great following. If you are a perfectionist, a large-scale helicopter with a turbine engine doesn’t get much more realistic.

All of my current models are electric powered. I am amazed at the power-to-weight ratio of the modern brushless motors. I fly a 33-pound Hughes OH-6 and a 36-pound 1/4 scale Bell 47 (both with full cockpits) that are powered by electric motors half the size of a soda can. Neither of these models would have gotten off the ground with gasoline or nitromethane. Another thing that I don’t miss is that awful nitro “smoke trail” that would ruin a beautiful Scale model in flight.

Along came the introduction of the flybarless controller, where you no longer had to fly a rotor head equipped with the flybar and paddle configuration, which was standard equipment to stabilize the model in flight. The electronic flybarless controller can stabilize the model with any configuration of rotor system, from two blades to multiple blades, allowing even more scalelike realism.

If you want your model to look scalelike and gain maximum points in competition, you will need to use a scale rotor system and not a model with a two-blade rotor, flybar, and paddles when it should be equipped with a flybarless or multiblade head. We now have helicopters available with tandem rotors, such as the Boeing Vertol CH-46, Boeing CH-47, and the Kamov with coaxial rotors. The multiblade rotor systems today are scalelike in appearance, fly as the full-scale aircraft do, and look extremely realistic in flight.

For modelers who don’t wish to venture into the realm of model turbine engines, excellent sound systems that add another level of realism are available. They are offered in turbine and piston sounds. I have these in my models and they are worth every penny.

I attended a fun-fly, and after flying one of my sound-equipped models, I had an experienced pilot ask me which brand of turbine engine I was using. He was surprised to find that the model had an electric motor and the turbine sound was from a sound system.

Today’s modelers are fortunate to have some fine Scale helicopter kits available—some are almost ready to fly and some are ready to fly. The interest in Scale helis has really grown with the introduction of the Roban ARF kits. You don’t have to have years of building experience, a workshop, or a paint room to own a beautiful Scale helicopter. It doesn’t take months of building to finish a model. I have received a Roban kit and had it flying within 10 days.

Roban offers a large selection of models from which to choose. Some are complete, apart from the motor and electronics. The company offers Super Scale 700- and 800-size kits with prebuilt mechanics and beautifully painted fuselages, including rivets and panel lines, exterior detailing, scale rotorheads, blades, and cockpits.

Green and blue scale RC helicopters displayed on a wooden table
Michael Roznick, from Dallas, is an engineer at Bell/Textron. He makes unusual subjects, many of which he designs and 3D prints himself, including this Sikorsky S-34 Choctaw. Mike recreates the recovery of Alan Sheppard’s Freedom 7 Mercury Capsule that is duplicated right down to the correct markings on his S-34, which was used by the U.S. Marines during the recovery. Photo by Andy Griffith.
A tan-and-green scale RC Cobra helicopter shown in profile
Andy Griffith’s 20-year-old Hirobo Cobra is a 700-size helicopter that was converted from glow power to 12S electric and rescued from an estate sale. He gutted the electronics and replaced everything with modern servos and a PowerBox Systems S.Bus receiver. He further converted it to flybarless with a BavarianDEMON Axon, so it looks even more scalelike. A Darrell Sprayberry clutch adapter is mounted to a Scorpion motor, which gives a realistic-looking and sounding start-up sequence. Photo by Amy Watkins.
A red-and-white Vario Bell 47G3 scale helicopter with an open cockpit
A 1/4-scale Vario Bell 47G3 with scratch-built cockpit and Premier Pilots pilot figure.
Red and white Roban 800 Super Scale Bell 412 model helicopter on grass
This Roban 800 Super Scale Bell 412 model took 10 days from opening the box to flight.

07. This Roban 800 Super Scale Bell 412 model took 10 days from opening the box to flight.

All of the woodwork is preinstalled and the aircraft is ready to install the mechanics, which only requires the builder to add his or her choice of motor and electronics. After the mechanics are installed, you’re ready to set up your necessary flight parameters and fly. Roban also offers prepainted fuselage kits to accept most any mechanics. Roban products can be purchased through its US distributor, Motion RC. There are other companies that offer only fuselage kits. Some of these are white gelcoat, others primed, and some are prepainted and waiting for the installation of your choice of mechanics.

Vario Helicopters, a well-established company in Germany, offers everything needed to build any of the company’s fine gelcoat fuselage kits. It offers kits ranging in size from 1/8 to 1/3 scale, with a choice of electric or turbine power and hundreds of scale accessories that will fit nearly any Scale project. Vario has two distributors in the US: Heli Workshop and Peak Aircraft.

Heli-Factory, a company also located in Germany, offers RTF models or you can order them in various stages of completion. You can also order the fuselage and components separately if you are building a model to suit your desires or building from documentation. Heli-Factory models are custom-built to the customer’s specifications and are some of the most realistic models that can be purchased. These helicopters look so real that it is hard to tell the model from the full-scale aircraft. The US distributor for these fine models is Heli-Factory USA.

I have only highlighted products and companies that are readily available in the US. You can search the internet and find other superb Scale helicopter kits and accessories.

There has been an increase in the number of modelers who have become interested in Scale helicopters. There is no greater thrill or compliment than when someone walks up after you fly and tells you that your model looks just like a “real” helicopter. With the large selection, sizes, and quality of Scale helicopter kits and accessories that are available today, along with the information available on the internet, anyone can enjoy the fabulous world of RC Scale helicopters.

SOURCES:

Scale-Print
info@scale-print.de
www.scale-print.de/en

Roban/Motion RC
(224) 633-9090
www.motionrc.com

Vario Helicopter USA/Heli Workshop
(888) 295-7910
www.vario-helicopter.biz/us1

Vario Helicopter USA/Peak Aircraft
(303) 358-5124
www.vario-helicopter.biz/us2

Heli-Factory USA
(303) 358-5124
www.heli-factoryusa.com

Scorpion Power System
support@spihk.com
www.scorpionsystem.com

Horizon Hobby
(888) 959-2307
www.horizonhobby.com

Premier Pilots
(858) 336-3649
www.premierpilots.net

BlackOpsToys
www.blackopstoys.com

PowerBox Systems-Americas
(904) 330-0145
www.powerbox-americas.com

Castle Creations
(913) 390-6939
http://home.castlecreations.com