Edition: Model Aviation - 2021/11
Page Numbers: 28, 29, 30, 31, 32, 33
Aerial view of the AMA National Fun Fly flightline, tents, aircraft, and attendees

AMA National Fun Fly 2021

Second annual family-friendly event is a success

By Jenni Alderman
jennifer@modelaircraft.org
Photos by the author and as noted

What could be better than comfortable temperatures, a clear blue sky, and low wind on a mid-summer weekend? Bringing modelers and spectators together for a weekend of flying, friends, and fun! The second AMA National Fun Fly took place July 30 through August 1, 2021, at the International Aeromodeling Center (IAC) in Muncie, Indiana. The inaugural 2020 event was held in June in the middle of the COVID-19 pandemic and drew less than 100 pilots and few spectators, but this year, with relaxed regulations and modelers itching to go to events, pilot registration ended with 127 pilots! Contest Director and AMA Executive Vice President (EVP) Randy Cameron said, “It was good growth for the event, from the 87 [pilots] that we had last year.”

Additions to this year’s event included a swap shop. Thirty tables were rented and the tent, behind the main line and flying area, was filled with old engines, kits, aircraft, and other miscellaneous items that modelers had for sale. More swap shop vendors arrived on Saturday and set up canopies next to the big tent with their own goods and wares to sell.

Although Site 3 at the IAC was the main event area and flightline, approximately 20 to 30 pilots took advantage of the grass runway at Site 4 to fly, while James Hubbell set up buddy-box instruction at Site 1. James stated that Sunday, August 1, was his busiest day, but he buddy boxed 17 youth and adults all three days, including several AMA employees. “We had two who basically soloed while still attached to the buddy box, including one of the youth participants,” he said, “and several of the participants flew more than one time.” He is already planning and looking forward to next year.

Aerial view of the AMA National Fun Fly flightline, tents, aircraft, and attendees
An aerial view of the flightline and some of the 127 pilots who attended the 2021 AMA National Fun Fly. Getting together with friends to fly—many for the first time in a couple of years—made for a successful and fun event! Photo by Matt Ruddick.

Several vendors and exhibitors set up under the main flightline tents, including the Museum of the Soldier, from Portland, Indiana, a privately owned and operated not-for-profit gallery of military artifacts, as well as Carolina Custom Kits, which showcased some of its balsa airplane kits.

The local hobby shop, Toys Forever Models & Hobbies, brought its mobile trailer hobby shop and was busy throughout the event with customers looking to buy new aircraft. The AMA Foundation also set up a booth with information about the foundation and food and drink concessions, provided by Meijer, for its donors.

The product raffle and 50/50 raffle table were especially popular among attendees, with many products donated by retailers, hobby shops, and others. Terry Frazer staffed the booth throughout the event and was kept on his toes selling raffle tickets to pilots and spectators who hoped to be potential winners.

Although a crosswind on Friday had many pilots waiting to see if it calmed down or changed direction (which it did toward late afternoon and evening—and the flightline became busy!), Saturday’s flight boxes were full from start to finish! A large variety of aircraft lined the tarmac from one end to the other. There was everything from turbine-powered jets and 3D-type airplanes, to warbirds and Giant Scale foamies, to micro biplanes, profile aircraft, and flying wings. As soon as one pilot would leave a flight station after landing his or her aircraft, it would quickly fill with another.

With so many cool aircraft in the air, it was hard for anyone to choose a favorite, but some that wowed the crowd of spectators included Ed Heaston’s 40% 100cc Pilot RC Oracle Pitts biplane, Greg Alderman’s BVM Jets turbine-powered Yak-130, and Jason McQuistion’s giant scratch-built, foam board C-47 (which was also used as a tow for his glider), among others.

It was also fun to see some of the younger pilots out flying, including Jason’s son, Andrew, and Kaleb Spencer. You might remember Kaleb as the builder of the 500% BETA during Camp AMA 2021 (see the YouTube video link in “Sources”). Kaleb also got to fly with and get his airplane autographed by Nate Saylor of the RC Saylors during the National Fun Fly, and the grin on his face didn’t leave for quite a while!

Possibly because of promotion of AMA by the Muncie Visitors Bureau or locals wanting to get out and about on such a nice day, there were many spectators on

People attending a donor appreciation luncheon in a meeting room
Kelsie Walker, the AMA Foundation director, speaks to donors who attended the foundation’s donor appreciation luncheon, which took place in the National Aviation Museum’s Claude McCullough Education Facility on July 31.
Two pilots holding radio transmitters at the flying site
Look at that smile! James Hubbell buddy-boxed newcomers to the hobby throughout the weekend. Seventeen participants—youth and adults alike—took advantage of the training at Site 1 of the IAC. Photo by Ken Achee.
Aircraft displayed for sale in the swap shop tent
The swap shop tent was a potential buyer’s dream, with many aircraft, kits, engines, and other miscellaneous items provided for sale by vendors. The aircraft shown in this photo were brought to Muncie by longtime AMA supporter Ralph Warner as a donation from the estate of an AMA member, with the proceeds benefiting the AMA Foundation.
A young pilot and Nate Saylor pose with model aircraft
AMA Youth member Kaleb Spencer (R) was one of several younger pilots who flew at the event. He was excited to be able to fly with Nate Saylor (L), of the RC Saylors. Nate even autographed Kaleb’s E-flite Valiant.
Model C-47 aircraft taxiing on the runway
Jason McQuistion flew his scratch-built, foam board C-47 several times throughout the event, even using it as a tow plane for his glider!
Model C-47 aircraft flying low over the grass
Jason McQuistion flew his scratch-built, foam board C-47 several times throughout the event, even using it as a tow plane for his glider!
AMA Membership Meeting attendees gathered on the tarmac
AMA President Rich Hanson speaks to National Fun Fly attendees during the AMA Membership Meeting that was held Saturday, July 31. For those who could not attend, the meeting was streamed live and is available for viewing on the AMA website.

Saturday, many of whom had never been to the IAC or had even seen a model aircraft fly. Some were in awe and asked many questions of the pilots while peering under airplane canopies; others sat quietly on the outskirts of the tarmac in chairs, their eyes lifted to the sky. We hope that many were interested enough to come back to the event next year—possibly as AMA members and with aircraft to fly!

While the flying was happening on-site on Saturday, the AMA Foundation held a donor appreciation luncheon in the Claude McCullough Education Facility at the National Model Aviation Museum. Food was catered by Texas Roadhouse, with drinks provided by McAlister’s Deli. This appreciation luncheon was a thank-you to donors, with members of the foundation board, including outgoing board chairman Dan Bott and Foundation Director Kelsie Walker, speaking about the many facets of contributing and recognizing those who had given back to the hobby through the numerous levels of support. One donor even flew to AMA in a helicopter and landed in front of the museum!

The raffles were a huge hit, with a total of $3,748 collected in tickets for prizes and $206 for the 50/50, half of which was given to the raffle winner. Pilots gathered around the table to hear their winning numbers called and yelled in excitement as they came up to win their prizes. All of the proceeds from the raffles were donated to the AMA Foundation.

One of the main reasons for the National Fun Fly, beyond the flying and camaraderie, was to hold the annual AMA Membership Meeting, which took place at 5 p.m. on Saturday, July 31, before the pilots’ pizza dinner. AMA President Rich Hanson, EVP Randy Cameron, and Executive Director Chad Budreau, as well as district vice presidents (VPs), several associate vice presidents (AVPs), Chief Financial Officer Keith Sessions, Government Relations Director Tyler Dobbs, and Kelsie attended this in-person and virtual meeting (see the “Sources” for a link to the meeting). All gave updates about their districts or areas of expertise and answered questions from attendees.

Two AMA Superior Service Awards were presented during the meeting. Eric Williams, District II VP, recognized District II AVP Michael Wong, and Randy Gibson, District VII VP, awarded Donald B. Patterson his plaque.

I must mention Randy Gibson at this point—he was a trooper! He spent much of the event seeking medical care for a hand injury that happened before he left his home in Michigan for Muncie. Even with one arm

Red Oracle biplane flying over a grassy field
From Giant Scale aircraft, such as Ed Heaston’s 40% Pitts biplane, to micro models, such as Michael Wong’s UMX Pitts—whether electric, gas, or turbine powered—the array and sizes of aircraft at the National Fun Fly were across the spectrum!
Small red-and-white biplane on the runway
From Giant Scale aircraft, such as Ed Heaston’s 40% Pitts biplane, to micro models, such as Michael Wong’s UMX Pitts—whether electric, gas, or turbine powered—the array and sizes of aircraft at the National Fun Fly were across the spectrum!

wrapped and in a sling, he was able to make it to the meeting to present Donald with his award!

The pizza dinner from Papa Johns was the culmination of the event and took place under a tent on one of the new concrete pads near Site 3. Everyone was famished, but still took time between bites to regale each other with memories of flying and fellowship at a great benefit event!

Randy Cameron was pleased with the outcome of the fun-fly. “It was a great event, with a very good turnout, and it is amazing how well everyone got along,” he said. “I had many folks tell me they had a great time and they planned to be here again next year.”

As for the third annual event, he has some thoughts about it, including trying to make it bigger. “I think we should easily be able to double it in size next year, and we already have some ideas for what we can do to make it bigger and better. I’m truly excited about next year already—and it will be here before you know it!”

Watch for more information about next year’s AMA National Fun Fly, scheduled for June 24-26, 2022, in the coming months. We hope to see you there!

SOURCES:

AMA National Fun Fly and Membership Meeting
www.modelaircraft.org/funfly

AMA National Fun Fly Flickr Album
https://flic.kr/s/aHsmWpCRUC

AMA Foundation
www.modelaircraft.org/foundation

Camp AMA: 500% Scale AMA BETA
https://youtu.be/nYKhU0QB_Cc

Pilot standing behind an orange model airplane
District XI VP Phil Tallman was all smiles after another successful flight! He and several other Executive Council members and district representatives flew throughout the event.
Large red-and-white jet flying low over the runway
Smoke on! Keith Sessions’ Harlock RC Viper was one of several turbine-powered jets that wowed spectators, as well as other pilots, with their speed and aerobatic maneuvers while filling the sky with smoke trails.