Edition: Model Aviation - 2021/01
Page Numbers: 101
Portrait of Andy Argenio

District I

Connecticut, Maine, Massachusetts, New Hampshire, Rhode Island, Vermont

Portrait of Andy Argenio

District I Associate Vice President (AVP) Andrew Figler and David Nordin submitted the following event report covering one of the few float-fly events that was not canceled this year.

Despite the COVID-19 pandemic, a small, but successful, float-fly event was held at Great Hollow Lake in Monroe, Connecticut, on September 20, 2020. The event ran from 9 a.m. to 2 p.m.

The float-fly was hosted by the Trumbull Indian Ledge RC Club, which is one of Connecticut’s oldest clubs. The club has held float-fly events at this location for a remarkable 36 consecutive years. Usually, there are two events—one in the spring and one in the fall—but because of the emerging pandemic, the spring gathering was canceled.

This year, mask wearing and proper social distancing were the rule of the day for the 27 attendees, some of whom made the trip from other area RC clubs. All had a great time flying from the 700 feet of beach area on the 16-acre lake.

In the past six years, traditional balsa-framed and polyester film-covered, glow engine-powered model airplanes have mostly been replaced by popular lightweight, electric-powered, water-resistant, foam models, as seen in the photos.

Check the club’s website at https://sites.google.com/site/trumbullradiocontrolclub for future events.

Thank you, Andrew and David, for providing us with another fine event report. The AMA’s district officer team wishes everyone a safe and enjoyable holiday season with family and friends!

Man standing beside a scale rescue tugboat
Jim Fino piloted his great-looking, scale rescue tugboat during the event, along with AVP Andy Figler.
Child and adult standing with model airplanes
Jim Waterbury and his son had lots of fun models to fly.
Person preparing a model airplane beside a lake
Nick Mocciola throttles up his airplane for a lake takeoff.
Person giving a thumbs-up beside a model airplane
Joe Cornacchio gives a thumbs-up for another successful Kingfisher airplane flight.
Person holding a customized model airplane
Rich Messer flew his nicely customized Timber airplane.
Person with a large model airplane
Dan Frankel enjoyed flying his 78-inch E-flite Carbon-Z Cub.

Andy Argenio

Vice President
brandshobby@gmail.com
3 Sheila Ln., Smithfield, RI 02917
(401) 231-6901
www.amadistrict-1.org

ASSOCIATE VICE PRESIDENTS

Steve Brehm, Jamestown RI; (401) 423-1085; stbrehm@yahoo.com

Andrew Figlar, Shelton CT; (203) 513-8546; figlar335@att.net

James Gilliatt, Concord MA; (978) 369-9796; jegilliatt@comcast.com

Steve Goler, Salem MA; (617) 373-0884; nipmuck2@comcast.net

Daren Hudson, Greenland NH; (603) 674-5809; dth7@comcast.net

Ray LaBonte, Standish ME; (207) 892-7994; rplabonte@aol.com

Tom Lavoie, N. Smithfield RI; (401) 824-6134; d2tw4all@yahoo.com

Joan Liska, Middletown CT; (860) 347-0257; jliska9000@sbcglobal.net

Mark Montella, Falmouth MA; (508) 457-4984; montellamj@comcast.net

Thomas J. Puma Jr., North Clarendon VT; (802) 558-4439; usakcingt1@aol.com

Tom Rocheleau, Wethersfield CT; (860) 280-1701; trocheleau@cox.net

William Unghire, Newington CT; (860) 978-3533; n1cnvl@icloud.com

TECHNOLOGY AND SAFETY OFFICER

John Yassemedis, 5 Quarry Rd., Nashua NH 03062; (603) 321-8442; jyassemedis@comcast.net

EVENT SANCTION COORDINATOR

David Surwell, 24 Norwich Rd., Nashua NH 03062; (603) 888-2020; davidsurwell@comcast.net