Author: Gene Smith

Edition: Model Aviation - 2017/01
Page Numbers: 123, 124, 125
Gene Smith holds a model B-26 in a grassy field.

Get your Witch Hawk
or Zingo kits started

by Gene Smith
grwhiskey@brightok.net

Gene Smith holds a model B-26 in a grassy field.
Tom Arnold’s latest B-26 is nice and it flies well.

Don’t forget to put your Witch Hawk 500 or Zingo on the board for 2017’s One-Design Gas model competition. Both the National Free Flight Society (NFFS) and the AMA Plans Service sell the plans.

A Witch Hawk full kit is available from BMJR Models, and a short kit is available from Bob Holman Plans. I built a model from each of these kits. The kit review will be in an upcoming Free Flight Digest. BMJR also has a Zingo kit.

Flying Models Plans

I mentioned this in my November column, but wanted to repeat the good news for those of us who still enjoy scratch-building models. Thanks to Thayer Syme, the Flying Models magazine plans service is back online. It has an extensive list of RC, Control Line, and of course, Free Flight (FF) models.

Speaking of plans available, Tom Arnold recently built his second B-26 from Pres Bruning plans. They are available from Flying Models. He had a great deal of fun flying the first B-26, which eventually garnered a place of honor hanging on the wall of his shop.

Tom used his foam-form method to construct the fuselage and nacelles for the new model. I saw the new B-26 fly at the Magnificent Mountain Men’s Labor Day contest last year. It had a great flight. Looks like Tom has another winner.

For those who don’t want the mess of melting out the foam, Tom has devised a way to remove it intact from the framed fuselage.

A grandfather helps a child prepare to launch a model airplane in a field.
With his grandfather George Voss’ help, Jasen Bailey prepares to launch his Tee Dee .049-powered Mirage.

A man holding two Witch Hawk model airplanes
The author built these two Witch Hawk 500s for the One-Design event at the 2016 AMA Nats.

P.T. Aviation

In my November 2016 column, I gave a brief mention to William Scott’s P.T. Aviation. He has a nice variety of Scale and Sport FF rubber model laser-cut kits. He has continued to add kits of airplanes that are eligible for Planes of the Spanish Civil War at the Western Region Flying Aces Club (WESTFAC) event this October. Check out his website.

Jasen Bailey’s Mirage

Nine-year-old Jasen Bailey built his Tee Dee .049-powered Mirage with the help of his grandfather, George Voss. The model has a Jedelsky wing and sheet balsa tail feathers, simplifying the construction. With George’s help, Jasen put up a nice flight at the Tulsa Glue Dobbers’ annual event in Perry, Oklahoma, last August.

Atalante GB-10

Duke Horn’s latest project is a French light aircraft, the Atalante GB-10. Built by a private firm, only four airplanes were completed. Unable to find a three-view despite an extensive search, Duke used plans and two photos from E. Fillon’s Peanut Scale version to draw the plans for his model.

The model’s 49-inch wingspan and biplane configuration allow it to fly in five Flying Aces Club (FAC) events. It qualifies for Golden Age Scale, Golden Age Biplane Scale, Giant Scale, Jumbo Scale, and FAC Rubber Scale!

The 18-inch freewheeling propeller folds upon landing to prevent damage. Provided a “stop” is not used on the rear of the nose block, the propeller remains extended in freewheel mode. The propeller design is based on the Larrabee-style propeller such as what was used on the Gossamer Albatross. Duke has built two aircraft with this propeller style and believes it’s the best low-rpm-efficient propeller he has ever used.

Red silk covers the fuselage. Old-style red model tissue was used on the wing and tail. Robart Manufacturing mini hinges were used to secure the struts. They fold down when the wing is removed. The main wing spars are held in place using a medium-size spring and hooks. The decalage can be adjusted with 2-56 screws. The wheels are inflatable Trexlers.

Red model Atalante GB-10 airplane
Duke Horn turned out another beauty with this little-known Scale Atalante GB-10. Horn photo.

Initial test flights looked promising. Duke started with 12 strands of 3/16-inch Tan Super Sport that is 38 inches long. He suspects the model will require slightly more power before the trimming process is complete.

If you are interested in the Larrabee propeller, an excellent article about the subject was in the March 1990 issue of Aeromodeller magazine. A copy of the article is available on the Volaré Products website, under the How-To links (click on 850 FREE—Free Flight Articles—PFFT), and on the National Free Flight Society (NFFS) website in the technical library, under Prop Designer, Boor-Larrabee.

E-20

I wasn’t sure the E-20 event was going to find much of a following, but I am beginning to hear that more people are giving it a try. Bob Aberle did a nice review of E-20 in his “Frequently Asked Questions” column in the June 2016 issue of Model Aviation.

Our cottage industry suppliers have continued to add to and improve their product offerings for this event. See my November 2016 column for more information.

Bob Selman has entered the E-20 timer/dethermalizer (DT) market. An optional remote DT port is available. The motor and DT time are programmed by a removable shunt. This could be a remote potentiometer that plugs in for sporting pushbutton start/stop.

The unit measures 1⅝ x ¾ inches and weighs 2.8 grams. The remote DT option adds 1 gram. Check out the BSD Micro RC website for details.

Scale Staffel Newsletter

William Scott is editor of the Scale Staffel digital newsletter. It documents the activities of the Scale Staffel Model Airplane Club/FAC Squadron #41 in San Diego. Subscriptions are free. Email William at the address listed in “Sources.”

Sources:

NFFS
www.freeflight.org

AMA
www.modelaircraft.org

BMJR Models
(321) 537-1159
www.bmj rmodels.com

Bob Holman Plans
(909) 885-3959
www.bhplans.com

Flying Models plans
http://store.flying-models.com/catalog

P.T. Aviation
www.ptaviationmodels.com

WESTFAC
www.westernfac.com

Volaré Products
(269) 339-9795
www.volareproducts.com

BSD Micro RC, LLC
(417) 358-9521
www.bsdmicrorc.com

William Scott
wscott127@mac.com

Model airplane fuselage structure and foam form
By doubling the top and bottom longerons, Tom is able to release the structure from the form without melting the form in the solvent. Photo by Tom Arnold.