New offerings from Sullivan Products
by Sal Calvagna
rcgiants@optonline.net
Welcome back! The year is winding down and the holiday season is again upon us. It’s a great time to ponder next year’s new projects or maybe pick up a stocking stuffer or two. Either way, have a wonderful holiday season and a happy and healthy new year.
This month I’m featuring a couple of new offerings from Sullivan Products that are especially suited for RC Giants. Sullivan Products, located in Baltimore, has manufactured high-quality RC products and accessories for more than 50 years. Many of the company’s products can be found in our model aircraft. Sullivan Products is proud to announce a joint partnership with SuperDri, a leader in full-scale aviation smoke fluid, to produce SkySmoke. It is Sullivan part number S760. SkySmoke is 100% paraffinic oil with no additives, making it safe for all RC materials, including glues, foams, paints, and covering. It is also safe for turbine engines. Because it is paraffinic oil, it’s environmentally safe and there are no shipping restrictions. Give it a try—you’ll enjoy the full-scale smoke pouring out of your RC model.

The second product is the ProFlex Large Universal Fuel Line, part number S216. It is made from a proprietary Fluoroelastomer rubber that will never harden and is impervious to gas, glow fuel, diesel fuel, and smoke fluid. ProFlex Universal Fuel Line is also heat resistant and made in the US. For more information about these or any of Sullivan’s other offerings, please visit the company’s website, listed in “Sources.”


John Fitzmaurice’s 1/3-Scale Vickers F.B.19
John Fitzmaurice, of Toms River, New Jersey, built this unusual, rarely modeled 1/3-scale Vickers F.B.19 fighter from World War I. John drew up his own plans for the project.
It is powered by a Zenoah G62 on a Mick Reeves belt-drive unit, swinging a 29 x 10 propeller at 4,300 rpm. The model is covered in Solart ex material and painted in the PC12 color using a paint chip obtained from the Shuttleworth collection at the Old Warden Aerodrome in Bedfordshire, England. The fabric panels were hand stitched using more than 400 eyelets. It has a 96-inch wingspan and weighs 45 pounds.
The Vickers F.B.19 was a single-seat British scout aircraft, developed from the Barnwell Bullet, the predecessor to the Vickers E.S.1. The F.B.19 served with the Royal Flying Corps and Imperial Russian Air Service. It first flew in August 1916, and was armed with only one Vickers machine gun. It was considered slow compared with its contemporaries, and the 100 hp Gnome rotary engine lacked the power needed to reach high altitudes.
In addition to several design flaws, the Vickers F.B.19 airplanes were unpopular with the pilots who flew them. However, the Russians enjoyed better success when their F.B.19s were fitted with 130 hp Clerget engines. Approximately 65 of these aircraft were built.



Stan Zdon’s 1/4-Scale Nieuport 28
Stan Zdon, from Coon Rapids, Minnesota, built this nice example of a Balsa USA ¼-scale Nieuport 28C. The Nieuport has an 80-inch wingspan, is 61 inches long, and is powered by a Saito 150 glow-powered engine.
The model is covered with Solartex material, painted with exterior latex house paint, and finished in 147th Aero Squadron markings produced by Callie Graphics.
The Nieuport 28 made its first appearance in 1917, but was rejected by the French, who favored the stronger Spad XIII. The Americans also wanted the Spad, but because of a shortage of the aircraft, they were supplied with Nieuport 28s.
Although the Americans were generally happy with the Nieuport’s characteristics because they handled and maneuvered well, the aircraft were fragile and prone to accidents. Former U.S. President Theodore Roosevelt’s youngest son, Quentin Roosevelt, was shot down and killed while flying a Nieuport 28.

That’s it for now. Remember to have a safe and happy holiday season and a wonderful new year. See you in February 2017!
SOURCES:
Sullivan Products
(410) 732-3500
www.sullivanproducts.com
Balsa USA
(906) 863-6421
www.balsausa.com





