Author: Tom Sullivan

Edition: Model Aviation - 2016/11
Page Numbers: 67, 68, 69, 70
A green-and-yellow model Junkers Ju 87 Stuka flying against a blue sky.

Phoenix Model Stuka Ju 87 Gp/Ep Arf

An electrified dive bomber

Tom Sullivan
tmsullivan80@gmail.com

In the air, the Phoenix Stuka ARF is a fantastic flier. It requires roughly half throttle to cruise around realistically. The only thing missing is the growl from a water-cooled, inverted V-12 engine.

A green-and-yellow model Junkers Ju 87 Stuka flying against a blue sky.

In 1935, a German aircraft designer named Hermann Pohlmann came up with a new design for a ground-attack airplane. It was so revolutionary that it helped define what we know today as precision bombing.

That airplane was the Junkers Ju 87 Stuka. With its inverted gull wings, fixed spatted undercarriage, and legendary siren, it became one of the best-known warbirds used in World War II.

Now that same design has been reproduced by the Phoenix Model company in 1:5-¾ size. Far from a small foamie, this semiscale ARF model has a 75-inch wingspan and is built-up from laser-cut balsa and plywood.

The airframe is covered with a unique, preprinted German camouflage scheme (medium and dark green on the upper surfaces, gray on the underside), but a wealth of details printed on the covering includes panel lines, hatches, Iron Crosses, and squadron markings. It’s an interesting covering that seems to have an adhesive backing.

The individual airframe components are solidly made with typical built-up construction, and an outer layer of sheeting. It feels solid in your hands and the wing panels don’t show any signs of bending or warps when under stress.

Matching the colors is a wealth of prepainted parts made from a variety of materials. The largest of these are the fiberglass cowl, wheel pants, wheel spats, and underwing fuel tanks. Smaller pieces made from plastic include the stabilizer/elevator end caps, spinner, and two identical pilot busts (one pilot and one gunner). Rounding out the parts are an aluminum wing tube, wheels, fuel tank, control hardware, and even a dummy bomb that can be mounted underneath the fuselage.

Multiple options are available to power the Stuka: glow, gas, or electric. Included are the parts to mount a glow engine via beam mounts, or if going electric as I did, there is a hardware package with a standoff to properly space the motor.

A substantial amount of work has been done for you at the factory. One of the more difficult things to do when building

For an inexpensive scale model, the Phoenix Stuka ARF kit includes a variety of items that are optional extras elsewhere—pilot figures, wing tanks, a spinner, and even a centerline bomb.

Phoenix Stuka model and included kit components arranged together
For an inexpensive scale model, the Phoenix Stuka ARF kit includes a variety of items that are optional extras elsewhere—pilot figures, wing tanks, a spinner, and even a centerline bomb. Photos by the author

a Stuka is to correctly align and install the ailerons and flaps. Well, no worries here because all of that is done right out of the box.

As usual in my reviews, I’m not going to go through all of the construction steps. If you’d like to see the steps, a link to the Stuka ARF’s manual is in the “Sources” section. The manual is 28 pages long and is surprisingly good considering it was translated into English. Each step has at least one detailed drawing showing what needs to be done.

Oh, one other thing before I go any further. You’ll notice a difference in the Stuka’s finish if comparing any close-up shots to the finished flight shots. The Stuka looks “factory fresh.” The covering has a sheen, but the painted parts are glossy in many cases, especially the canopy framing, the wheel pants, and the cowl.

Now, I wasn’t around back when Stukas were produced, so there may have been a few that looked that way, but for my taste, I chose to weather this one to give it a more authentic look. I’ll describe how I did this later.

Construction

As it seems to be with most ARFs, the wings are assembled first. For the Phoenix Model Stuka, it is a simple matter of installing six servos (three per wing—one aileron and two flaps). These mount inside of the wing, attached to the back of the hatches installed on the underside of the wings.

Several servo extensions will be needed to extend the connectors to the root of each wing panel. After the control horns are mounted, the pushrods and clevises are installed.

If you choose to mount the underwing fuel tanks, they are installed next. Attach a pylon to each wing half then attach the tanks via a few self-tapping screws. I had to do some trimming to allow the tanks to slide onto the pylons. Take your time and trim little by little to ensure a good fit.

The main gear is installed to finish the wing panels. When looking at how these gear legs are installed, I was slightly skeptical about the X-pattern design. Not knowing how much wood and support was designed into the wing, it appeared to be a weak point.

I continued and installed the struts according to the instructions. When the strut is bolted into place, the cover is installed, followed by the wheel pants. Some trial and error is needed to get everything positioned before drilling the mounting holes. After everything is in place, the wheels and axles are installed.

Work shifts to the fuselage where the stabilizer and elevator halves are epoxied into position. On each end are end caps that need to be cut and trimmed from a sheet of vacuum-formed plastic. When glued into position, each of these pieces resembles the counterbalances of the full-scale Stuka.

Now the rudder should be installed. All of the hinge slots for the stabilizer/elevators and fin/rudder were precut at the factory, but I had to do some extra cutting to lengthen the slots for the vertical fin. All of the hinges are the CA-type hinges, held in place with a few drops of thin CA glue.

Beneath the vertical fin, the tail wheel assembly is attached by first drilling two holes and threading in the mounting screws. The long steering arm on the rear of the tail wheel is then attached to the bottom of the rudder with two plastic fittings. The tail wheel axle’s bright chrome finish detracts slightly from the Stuka’s scalelike appearance, but you could always prime and paint it.

Moving up front to the cockpit, the rudder and elevator servos are installed, then the pushrods are inserted into the preinstalled guide tubes (one for the rudder and one for each elevator half), exiting at the rear of the fuselage (after cutting an exit hole for each). Tying the two elevator servos together so it will operate as a single pushrod is a hexagonal piece with three drilled holes and three other holes that are tapped to accept a setscrew.

Each of the elevator pushrods is inserted into the outer holes, and a smaller pushrod that extends to the servo is inserted in the center hole. Using some threadlocker, everything is then locked into a single pushrod. (I made a small flat spot on each of the pushrods to keep them from rotating and moving inside the joiner.)

After attaching the control horns and clevises, the two stabilizer supports are attached using three screws each.

Now you need to decide how to power your Stuka. In my case, an electric power system was supplied, consisting of a RimFire 1.20, an 80-amp ESC, and a 6S 5,000 mAh battery. This electric power system is a good match for the Phoenix Stuka.

Included in the kit is all of the hardware needed to mount the RimFire brushless motor and no drilling is required. Simply use the supplied hardware and some threadlocker. You’ll find that everything is properly spaced. If you do choose to install a glow engine, a two-part beam mount is included that bolts into the same mounting holes as the RimFire. Also included are a fuel tank and a throttle pushrod.

One great thing about using electric power was that there was no fiddling or trimming to fit the cowl. It simply slipped over everything with no clearance problems. After positioning it to center on the spinner and have the proper spacing to the backplate, I drilled four holes and the cowl was attached. It was as simple as that.

To finish the power installation, I removed the cowl and mounted the ESC on the underside of the motor box. The

AT A GLANCE ...

SPECIFICATIONS

Model type: 1:5-3/4 semiscale ARF
Skill level: Advanced
Wingspan: 75 inches
Wing area: 936 square inches
Airfoil: Semisymmetrical
Length: 60 inches
Weight: Listed at 10.8 to 11.9 pounds; actual 12.375 pounds
Radio: Minimum six-channel, nine standard high-torque servos
Power system: Recommended: 1.20 two-stroke; 1.40 four-stroke; 20cc (gas); or 1,600- to 2,200-watt electric with 5S or 6S 5,500 mAh battery
Price: $289.99

TEST-MODEL DETAILS:

Power system: RimFire 1.20 brushless outrunner motor; ElectriFly 80-amp ESC; 6S 5,000 mAh LiPo battery
Radio: Tactic TR625 receiver; nine TSX45 Tactic servos; three Y harnesses, four servo extensions

PLUSES

  • Laser-cut balsa and plywood used in construction of the complete airframe.
  • Prepainted fiberglass cowl, wheel pants, and wheel spats included.
  • Film covering is in a typical German camouflage color scheme, preprinted with a wealth of panel lines and hatch details.
  • Two-piece, plug-in wing panels supported by an aluminum wing tube.
  • Aileron and flaps are preinstalled.
  • Firewall comes predrilled and includes preinstalled T-nuts.
  • The front half of the canopy doubles as a hatch for battery, radio, and tank access.
  • External tanks and bomb are included to add scale detail.
  • Prepainted pilot and gunner figures are included.

MINUS

  • The port main gear failed on the maiden flight during an average landing.
Stuka cockpit canopy hatch opened to show installed equipment
The front half of the canopy doubles as an easily removable hatch, providing access to the radio, and fuel tank or batteries.
Brushless electric motor mounted on the model’s motor box
An electric power system was supplied as part of the review. Although the author leaned toward a 20cc gasoline engine, the RimFire 1.20 motor and a 6S battery pack were a nice match for the airframe.
Interior fuselage with radio equipment and battery installed
There is ample room inside of the fuselage for nearly any radio system. Toward the right is the 6S 4,200 mAh battery installed. If using glow/gas power, the fuel tank would be positioned there instead.

Stuka’s cowl seemed as though it was designed just for this, with openings and ducts to allow cooling air over the ESC.

On the top of the mounting box, I made a small scoop out of scrap 3/32-balsa sheet. Before gluing it in position, I opened up the laser-cut holes to 1-inch each, allowing much more air to pass through the fuselage and cool the LiPo battery. To allow the air to escape, I drilled a series of eight 1/2-inch holes on the underside of the fuselage, slightly ahead of the stabilizer.

Now work moves to the cockpit and canopy area. First, the front half of the canopy is attached to the framework. The manual says it can be attached with either adhesive tape or CA glue. Because tape is known to stop working (especially when it gets warm) and CA will fog clear plastic, I used my old standby—clear canopy glue.

After it was cured, I used a few small screws to guarantee that things would stay in place. While I was at it, I also used a few screws to hold the back half of the canopy in place. After touching up the screw heads with matching green paint, you’d have to look hard to find them.

This front part of the cockpit doubles as a hatch using a preinstalled spring latch to lock it in place. When it is removed, it opens a large hole where the receiver and receiver battery are installed. I made a small cut into the servo tray and installed the on/off switch for the radio. The LiPo battery tray is slightly forward of the servo tray and is held in place with hook-and-loop material (not included).

A few other optional details can be added for more realism. One is a set of gun “blisters” that are cut from vacuum-formed plastic and glued to the top of each wing panel. Another is a preassembled bomb that is held under the center of the fuselage with a single

Stuka model aircraft in flight, showing extended dive flaps
This angle shows off the long, multipart dive flaps for which the Stuka is famous. When extended, they work wonders in slowing the Stuka for slow passes, simulated dive bomb runs, or for landing.

screw. It looked slightly small to me, so I chose not to install it. You could always try it, and it’s simple to remove if you change your mind.

This finishes the Phoenix Stuka’s assembly. I was happy to see that the model balanced right where it should. There’s a little room to move the LiPo fore/aft if balance is a problem. The manual calls for the Stuka to weigh between 11.25 and 12 pounds. This review model was 12.375 pounds without the battery.

One more thing before I discuss flying. As I noted before, the Stuka comes “factory fresh.” I wanted to weather mine to match Stukas I’ve seen in photos. I first masked off the canopy using Frisket film, available at most arts and crafts stores. It’s a tedious process, but it’s the best way I’ve found. Then I gave the entire airframe a once over with clear, matte Rust-Oleum paint.

When that dried, the fun started. Using several colors of Tamiya model paint, I thinned each of them so that they would be easy to airbrush. Taking my time, I first laid down the grime layer—a light coat of dark gray underneath and black on top. I painted along many of the panel lines, especially those where dirt, grease, and grime would be blown rearward during flight.

After that dried, it was time to dirty things up with a series of brown colors to simulate years of mud and dirt—especially on the cowl and wheel pants. If you choose to try this yourself, don’t try to do everything in one pass. Work up to the finished look with several light layers of paint, each building on the last.

Flying

Any model’s maiden flight gives me butterflies, and the Stuka’s did more than usual because of the amount of work I had put into it. After taxiing, I lined up into the wind and applied power. To my surprise, this slightly overweight Stuka (according to the manual’s specifications) accelerated with authority and lifted off in roughly 150 feet. It needed a lot of trim to get it to fly hands off, but after a few passes it was trimmed out and ready for the photo passes.

Approximately half power was more than sufficient for the Stuka to maneuver and fly realistic passes at a very nice, scalelike speed. Actually, I was very impressed at how well it flew at these slow speeds.

Not knowing the flight time that the 5,000 mAh battery pack would give, after 7 or 8 minutes it was time to land and check things out. I flew a couple of practice approaches to judge the speed and sink rate, then settled in for the landing. I touched down with an average landing, but the strut of the port main gear broke where the axle threads in. It was a pretty light touch—so light, in fact, that the fiberglass wheel pant remained attached and easily held up the wing.

After some grumbling and a few choice words about my luck, a replacement set of gear was sent and installed. I’m happy to say that so far, this pair of struts has held up, but I’ll admit that I’ve been landing the Stuka carefully. I always land with half flaps and try for either a three-point landing, or to touch the tail gear down first.

I’ve had sufficient time to evaluate the Stuka and I really like the way it flies. It has far more than adequate power, and I find myself usually only needing half throttle for a typical flight. I know that many of you will be looping, rolling, and doing inverted flying with your Stuka, so I’ve tried some of that with no problems at all. The power system has plenty in reserve.

The flaps are extremely effective, just as split flaps should be. When deployed, the Stuka will pitch down, so some up-elevator mix is needed for a smooth transition. I rarely use more than half flaps, but when I do deploy them fully, the Stuka can be brought to extremely slow speed. Use the throttle to pull you out of trouble if you get too slow, but that rarely happens.

Conclusion

I’m a sucker for warbirds, especially for many of the German designs, so the Phoenix Model Stuka ARF is right up my alley. It has a great flight envelope and plenty of power with the RimFire power system. Its plug-in wing system is a snap to assemble at the field and despite the initial landing mishap, the entire airframe has held up well. Takeoffs and landings are straight and true with no tendency to swerve when the tail wheel lifts off.

With some throttle management, flight times can be as long as 12 minutes on a 5,000 mAh battery pack—slightly less if you choose to power through the sky. Either way, the Stuka is a great model and worth a look if you’re in the market for an inexpensive warbird.

—Tom Sullivan
tmsullivan80@gmail.com

MANUFACTURER/DISTRIBUTOR:

Phoenix Model
www.phoenixmodel.com

Tower Hobbies
(800) 637-6050
www.towerhobbies.com

SOURCES:

Stuka manual
www.towerhobbies.com/manuals/pmm/pmma0380_manual.pdf

ElectriFly
(800) 637-7660
www.electrifly.com

FlightPower
www.flightpowerbatteries.com

Tactic
www.tacticrc.com

APC Propellers
(530) 661-0399
www.apcprop.com