HORIZON HOBBY E-FLITE F4U-4 CORSAIR 1.2M BNF BASIC
Jon Barnes

Fly with the Marine Corps
Models with a wingspan of roughly 1 meter offer modelers an unbeatable grab-and-go convenience. Airplanes of this size and type typically fit fully assembled into even the smallest of automobiles and can yield 4- to 6-minute flight durations using nothing more than eminently affordable three-cell 2,200 mAh LiPo batteries.
In the last year or so, E-flite has been steadily reworking and revising its 1-meter class warbirds. Previous iterations of these airplanes, many of which were available under the ParkZone moniker, often did not include electric retracts or flaps. Many pilots were quick to add these options, either by purchasing them at an extra cost or bashing them into the models using their own ingenuity and methods.
E-flite’s latest generation of Z-Foam composition warbirds offers warbird-loving pilots a 1.2-meter wingspan model that comes from the factory bearing full options. With new versions of the ever-popular T-28 Trojan and P-51D Mustang already released and available, E-flite’s third offering in the 1.2-meter warbird series is the F4U-4 Corsair.
This classic fighter/bomber is known and instantly recognized by many, because of the unique geometry of its inverted gull wing. Although originally designed to fulfill a need for carrier-capable, advanced fighter aircraft, its initial performance when flown from the deck of a carrier proved challenging and beyond the ability of many pilots. This slight wrinkle early in the Corsair’s deployment resulted in it initially being extensively used by the U.S. Marine Corps in a variety of land-based roles.
As a testament to the Corsair’s critical ground-based role early in its aviation career, E-flite’s 1,200mm version of the Corsair arrives bedecked in the bright blue and green colors used on the training aircraft based at the Marine Corps Air Station Cherry Point in North Carolina.
Attractive scale details include authentic 90° rotating main gear
This BNF kit is engineered to minimize a pilot’s build time; most will easily complete the build in less than an hour.

The AS3X technology embedded in the included Spektrum AR636A receiver gives this Corsair uncanny stability and amazing slow-speed capabilities.

(electric retracts), a large-diameter four-blade propeller, and easily removable external fuel tanks. This Z-Foam composition warbird includes operational flaps right out of the box. E-flite’s design engineers even faithfully reproduced the multipaneled flaps used on the trailing edge of the unconventionally shaped gull wing used on the Corsair!
Construction
As a Bind-and-Fly (BNF) Basic kit, this model comes out of the box in an advanced state of preassembly. A half-dozen quality Spektrum nine-gram servos are factory installed, as is a 15-size brushless electric power system. The only items that a modeler will need to supply to complete the Corsair are a minimum six-channel Spektrum-compatible transmitter and a 25 to 30C 3S 2,200 mAh LiPo battery. The included Spektrum AR636A six-channel receiver features embedded AS3X stabilization technology and is factory tuned specifically for this model.
E-flite continues to improve and expand upon the level of scale detail included on its mass-produced warbird models. The Corsair includes a pilot figure and basic cockpit details.
Although most modelers are probably accustomed to reaching for a Phillips screwdriver when assembling modern BNF kits, the fasteners used on the Corsair require the use of metric hex drivers. The total airframe assembly is completed using a mere six fasteners. This assembly style makes it easy to disassemble the airplane for either transport or storage.
An included plastic pitot tube must be attached to the outer leading edge of the wing using a few drops of adhesive (not included). The assembly manual offers a compact, convenient matrix of programming instructions for most of the currently available Spektrum transmitters, as well as explicit guidelines as to which hole to insert the pushrod clevises when attaching them to the control surfaces.
Ample space is provided in the fuselage to allow pilots to experiment with slightly higher-capacity batteries. A pair of hook-and-loop battery-retention straps are preinstalled, but most modelers will probably want to supplement them with strips of surface-mounted hook-and-loop material as well.
The Corsair’s assembly manual includes specific recommended control throws for the primary flight surfaces. E-flite also lists recommended high and low dual-rate settings of 100% and 65%. Pilots will want to verify the correct center of gravity (CG), as well as the directions of the automatically generated AS3X corrective deflections before sending the Corsair up for its first flight.
AT A GLANCE ...
SPECIFICATIONS
Model type: Foam electric warbird
Skill level: Intermediate
Wingspan: 48 inches
Wing area: 431 square inches
Length: 38.2 inches
Weight: 53 ounces
Power system: Brushless electric system (included)
Radio: Spektrum DX9 DSMX nine-channel transmitter
Construction: Z-Foam
Street price: $269.99
TEST-MODEL DETAILS
Motor used: E-flite 850 Kv 15 brushless electric outrunner (installed)
Speed controller: E-flite 40-amp brushless with BEC (installed)
Servos: Six Spektrum A330 nine-gram submicro servos (installed)
Battery: Three-cell 11.1-volt 25C 2,200 mAh LiPo
Propeller: Four-blade 10.5 x 8
Radio system: Spektrum AS3X-equipped AR636A six-channel receiver (installed)
Ready-to-fly weight: 53 ounces
Flight duration: 4 to 6 minutes
PLUSES
- Rough-and-ready blue and green U.S. Marines paint scheme.
- Scalelike operational rotating main electric retracts.
- Removable external fuel tanks.
- AS3X stabilization offers superb slow-speed stability and handling.
- Multipaneled flaps closely emulate those used on the full-scale airplane.
MINUS
- No scale underwing armaments included.
Flying
Sliding the recommended 3S 2,200 mAh LiPo all the way forward until it butts up against the rear of the firewall serves as a great starting point for the Corsair’s initial flights. This battery position makes the aircraft balance toward the front of the recommended CG range of 70mm to 76mm. Initial flights were made using high-rate throws.
The airframe initially demonstrated a subtle tendency to both roll toward the right and pitch down. Trim adjustments made on an AS3X-equipped system require a pilot to refrain from making any control inputs for at least three seconds after applying trim. With two

The 90° rotating main gear is driven by dependable E-flite electric retracts. Diamond-tread tires enhance the gear’s realism.
generated AS3X corrective deflections before sending the Corsair up for its first flight.

E-flite nicely recreates the multipaneled flaps used on the full-scale Corsair.

ticks of left aileron and two ticks of up-elevator clicked in, the F4U-4 flew hands off at 50% throttle.
The 850 Kv .15-size brushless outrunner and four-blade propeller endow this model with an appropriate and pleasing power curve. Although performance and speed at wide-open throttle might not satisfy those bitten hard by the speed bug, pilots who prefer that their sport scale warbirds fly as realistically as possible will be more than satisfied with this model’s capabilities and overall speed envelope.
Because the model does not use a conventional plastic spinner, those who wish to experiment with the potential boost in speed offered by standard two-blade propellers will not need to source a two-blade spinner. The large propeller disk created by the yellow-tipped four-blade propeller enhances the in-flight persona of this Corsair and looks downright brutish in the air. With the external tanks loaded in place on the underside of the wing, this model presents a rough-and-ready, all-business profile.
Pilots will want to take advantage of the multipanel flaps when executing departures and arrivals. They effectively allow the Corsair to get off of the ground early in the takeoff roll and also slow the aircraft nicely when working through the landing pattern. The AS3X is invaluable in keeping the Corsair rock solid, even when flown on windy days.
The system minimizes the amount of corrective rudder input needed when taking off. Pilots who are new to the challenges inherent to a tail-dragger-configured warbird will likely find that this Corsair is the perfect model with which to develop and perfect their tail-dragger skillset.
With the flaps fully deployed and the gear left up, this model can fly slow passes that will leave pilots and onlookers alike amazed! The sight of this blue and green F4U-4 slowly descending toward the runway, its main gear dropping and rotating into position as it slips across the numbers, is fantastic!
Flight durations of 5 to 6 minutes are well within reach if a pilot actively modulates the throttle throughout the flight. Those who tend to leave it firewalled from takeoff to landing should probably go with a more conservative 4-minute timer.
Conclusion
E-flite’s hangar of full-featured, AS3X-equipped, 1.2-meter wingspan, Z-Foam composition models continues to grow. With the addition of this U.S. Marine-themed Corsair, most pilots who favor flying warbird models probably now have their favorite fighter represented.
The advanced stabilization system minimizes many of the control challenges typically inherent to Scale warbirds, making it possible for even less-experienced pilots to handle this relatively short-coupled, tail-dragger airframe.
This model’s relatively light wing cube loading of 10.2 contributes to it having an almost unbelievably slow stall speed, with realistic, scalelike takeoffs and landings being the order of the day. From its brutish-looking four-blade propeller to its 90° rotating electric retracts and accurately modeled multipaneled flaps, the E-flite F4U-4 Corsair offers pilots a rugged-looking U.S. Marine Corps model in a convenient-size, durable Z-Foam composition, grab-and-go warbird.
—Jon Barnes
barnesjonr@yahoo.com
MANUFACTURER/DISTRIBUTOR:
Horizon Hobby
(800) 338-4639
www.e-fliterc.com
SOURCES:
Spektrum
(800) 338-4639
www.spektrumrc.com






