Edition: Model Aviation - 2016/03
Page Numbers: 115, 116, 117
NMPRA Championship Race winners posing with their model aircraft

NMPRA Championship race

NMPRA Championship Race winners posing with their model aircraft
The winners’ photo from the 2015 NMPRA Championship Race, held in Apopka FL. John McDermott is not pictured.

by Aaron “AJ” Seaholm
aseaholm@gmail.com

The National Miniature Pylon Racing Association (NMPRA) Championship Race was scheduled to take place October 3-4 at the revamped Old Julian Airport in North Carolina. The venue features a new field with a paved runway and takeoff pad.

Mother Nature had other ideas, and the event had to be canceled because of torrential downpours caused by a passing hurricane. The Langlois family and contest director (CD) Jimmy Katz had poured themselves into preparing for this race.

The Cliff Telford Tangerine race in Apopka, Florida, held December 4-6, was redesignated as the NMPRA Championship Race. Gary Freeman Sr., Scott Smith, and the Remote Control Association of Central Florida club delivered an exceptional event.

Teammates Randy Bridge and Ray Brown posing with a model airplane
Teammates Randy Bridge (L) and Ray Brown pose after Ray won the event and Randy set fast time. It’s a remarkable team effort.
Ray Brown holding the first-place trophy beside Gary Freeman Sr.
“Rocket” Ray Brown (L) accepts the NMPRA Championship Race first-place trophy from CD Gary Freeman Sr.

I had a blast at the contest, and it seemed that the 37 other competitors did as well. The weather was great, minus a few passing rain showers Saturday afternoon. We were able to complete nine rounds by 2 p.m. on Sunday.

The competition was tough all weekend, with tight racing taking place in nearly every heat. It was my first Q-40 race since February and my adrenaline was pumping all weekend. Special thanks to my amazing teammate and great friend, Scott Causey. We had not flown together in more than two years, but the comfort level was instantly back. Having a teammate you are confident and comfortable with is important in this sport. Tom Scott presented AMA President Bob Brown with more than $5,000 that was

Tom Scott presents a donation to AMA President Bob Brown.
AMA President Bob Brown (L) accepts a $5,000 donation to the Cliff Telford Memorial Scholarship fund from Tom Scott, who executes the annual raffle.

raised during the annual Cliff Telford Memorial raffle. This year my friend, Dennis Cranfill, won the fully finished CMAD Racing Miss Dara with Nelson propulsion and Futaba guidance.

Tom is the driving force behind this annual raffle. The impact this fundraiser has is appreciated by AMA and the students whom the scholarship fund supports. Thanks, Tom, for all you do!

NMPRA Championship

Name            Time  Points
1. Ray Brown         1:00.76 33
2. A.J. Seaholm        1:01.20 31
3. Terry Frazer        1:02.57 30
4. Stephen Vaclav       1:03.63 30
5. Bill Johanson        1:02.17 28
6. Dub Jett          1:02.20 28
7. Scott Causey        1:01.40 26
8. Dan Coe          1:02.00 25
9. Chuck Andraka        1:02.73 25
10. John McDermott       1:04.27 25
Fast time: Randy Bridge    1:00.62

“Rocket” Ray Brown took home top honors, with Randy Bridge calling. Randy took fast time with Rocket calling. Yes, this team also brought home the FAI F3D World Championship and set a new F3D world record earlier this year. It will be tough to top 2015. Congratulations to Rocket and Randy, and to all of the top finishers.

One to Watch: Trey Witte

Trey Witte, from North Carolina, has honed his skills at Old Julian Airport. Although he has been racing for several years, he has only competed in Q-40 for a couple of years. When thinking about the fact that some modelers in this sport have been competing in Q-40 since its inception nearly 20 years ago, I consider Trey a relative newcomer.

Trey has been the Nats assistant starter for several years. This firsthand exposure to the intensity of Q-40 at the Nats in Muncie, Indiana, probably helped in his development. He placed second in Q-40 in 2015, which was his first time competing in that event.

I spoke with Trey at the NMPRA Championship Race and learned that it has been a turbulent year for him. Trey’s 15-year-old son was paralyzed in a car accident. While he spent his time helping his son, his teammate, Dean Stone, prepared a new Miss Dara for Trey.

I asked Trey what he would tell other newcomers. He said, “Keep trying and practicing. Don’t worry about getting beat; that’s how you get better. Every dog has its day.”

Well said, Trey. Congratulations to Trey and Dean on a great performance at the 2015 Nats.

Nelson Spinner Alignment

I recently purchased new spinners for my Nelson motors from Aero Racing Engines. It seems that everyone has a slightly different method for aligning the spinner backplate. It is counterbalanced to change the resonance frequency of the spinner assembly during a run.

Here are the recommended mounting instructions from Mike Langlois of Aero Racing Engines:

  1. Loosen the glow plug.
  2. Center the crankshaft port in the Venturi.
  3. Line up the notch/hole in the spinner with the crankshaft port.
  4. Tighten the propeller.
  5. Recheck the alignment.
  6. Tighten the glow plug.

Adjust your propeller’s position to between 9 and 10 o’clock, with the engine setting on compression and the exhaust port closed. The goal is for the propeller to remain flat after the motor has been shut off to keep the propeller tip from grinding on landing.

Thanks, Mike.

Trey Witte and Dean Stone prepare a model aircraft engine.
Above: Trey Witte (R) and Dean Stone fire up a Nelson engine for a round at the 2015 AMA Nats en route to a second-place finish. Photo by Santiago Panzardi.
Trey Witte and Dean Stone beside their model aircraft during a race.
Left: Trey Witte and Dean Stone in the heat of a battle during a race at the Nats. Trey is a pilot to watch. Panzardi photo.

SOURCES:
NMPRA
www.nmpra.org

Aero Racing Engines
(336) 685-4000
www.aeroracingengines.com

CMAD Racing
(513) 604-6464
www.cmadracing.com