Edition: Model Aviation - 2002/06
Page Numbers: 14, 15

Worth a Closer Look

Transmitter Knobs

Madison Components' Transmitter Knobs are direct replacement tips for your transmitter's sticks. Each of these designs is machined from lightweight aluminum and is black anodized to give long life. The sides are knurled to keep your fingers from slipping.

Three designs are available: 1/2-inch diameter x 3/4-inch long (for finger fliers), 1/2-inch diameter x 1-1/4-inch long (for beginners and others who like a long stick), and 3/4-inch diameter x 5/8-inch long (for thumb fliers). Both designs for finger fliers have a concave surface with an engraved "M."

All Transmitter Knobs are sold in pairs for $16.95 and are available to fit most popular transmitters (including Futaba, Hitec, Airtronics, JR, and others). Each has a 3/8-inch-deep thread and a stainless-steel jam nut to lock the knob at the desired height.

Madison Components, Inc.: 1059 Valley Crest Dr., Birmingham AL 35226; Tel.: (205) 985-4040; Fax: (205) 985-9466; Web site: www.madisoncomponents.com

Phoenix Motor Controls

If you've been looking for US-made alternatives in sensored speed controls, Castle Creations has the new Phoenix line.

The Phoenix-10 ($69.95) can handle a continuous 10 amps (25-amp surge). It is available in aircraft and helicopter versions and is ideal for Astro 010 and Hacker BL-20 motor applications. Total weight with wires is only 0.3 ounces (8.5 grams).

The Phoenix-25 ($79.95) can handle a continuous 25 amps (40-amp surge). It is available in aircraft and helicopter versions and is ideal for Astro 020, Astro 05, Aveox 1005, Jet Phasor (less than 25 amps), and Hacker BL-20 and BL-40 motor applications. Total weight with wires is only 0.7 ounces (17 grams).

Both models can handle five to 10 cells using Battery Eliminator Circuit (BEC) or five to 10 cells without BEC. They also feature a safe "Power On" mode, low-torque "Soft Start"—which protects gearboxes and belt drives from shock—smooth reverse, exponential throttle, auto motor cutoff with reset, auto shut-down when the signal is lost, and small overall size (1.08 x 0.91 x 0.16 inch). Universal connectors are used throughout.

Castle Creations: 18773 W. 11th St., Olathe KS 66061; Tel.: (913) 438-6325; Fax: (913) 438-1394; Web site: www.castlecreations.com

Prop Talk

In Prop Talk, Understanding and Optimizing Propeller Performance for Model Electric Aircraft, author Don Brooks explains in a dialogue between two modelers how model-aircraft propellers function. In simple, easy-to-understand language, the description includes how characteristics of design, diameter, and pitch affect propeller performance. Don includes equations showing the relationships of pitch, diameter, and rpm with level flight speed and thrust. Effects of operating at high elevations and air temperatures are discussed.

Thrust calculations don't require higher math. A "Field Thrust Calculator," an enclosure of this 98-page book, allows the user to calculate thrust produced by an operating propeller from an rpm reading. Calculation on this pocket-sized chart calculator takes less time than it takes to change a propeller. Whether you fly Control Line, Radio Control, or Free Flight, you can very easily determine the thrust produced by your model before takeoff.

In Prop Talk, Don reports the results of a lot of experimentation and measurement of propeller-performance characteristics. The hard work is done. Propeller thrust coefficients, determined by direct measurement, are recorded in an appendix of the book for more than 200 fixed-blade and 21 folding propellers in common use. Propellers listed range from seven to 14 inches in diameter and include designs of APC, Graupner, Master Airscrew, Sonic-Tronics, Aero-naut, Zinger, Rev-Up, and TopFlite.

Although written with the electric modeler in mind, the current version of the thrust calculator will also work for aircraft powered by engines with displacements of as much as .40 cubic inch.

ARPI Books: 900 Bower Dr., Idaho Falls ID 83404 (Prop Talk, ISBN 0-9657014-0-9); E-mail: brooksdv@ida.net

Pro-Lite Wheels

Hangar 9's new Pro-Lite Wheels are a good blend of scale realism and weight savings. Each wheel features a skinned foam tire that has the appearance of real rubber, but at a fraction of the weight. The large hubs on which the tires come mounted are molded from durable plastic.

Pro-Lite wheels are available in 1/2- to 4-1/2-inch sizes.

Horizon Hobby Distribution: 4105 Fieldstone Rd., Champaign IL 61822; Tel.: (800) 338-4639; Web site: www.horizonhobby.com

Servo Tester/Digital Programmer

Hitec RCD has a new gizmo to help in programming digital servos. The HFP-10 is enclosed in a sturdy, extruded-aluminum housing and has an internal 4.8-volt rechargeable battery. The right side of the tester has connectors for the servo and the receiver (or charger for the internal battery).

After switching the unit on, the multitude of features are controlled by a row of four push buttons, and adjustments are made using the rotary dial in the upper right. An LCD (Liquid Crystal Display)-screen readout shows exactly what is happening.

Among the many adjustments available are factory-default reset, dead band width adjustment, direction of rotation, speed of rotation, fail-safe on/off, end point, neutral point, and fail-safe point preset.

The HFP-10 is also an analog servo tester featuring manual and automatic testing procedures, transmitter pulse-width measurement, and receiver voltage measurement.

Hitec RCD: 12115 Paine St., Poway CA 92064; Tel.: (858)

JR DS8411SA Digital Servo

This servo was the inspiration of World Champion helicopter pilot Curtis Youngblood. He retrofitted the 8411 servos on the swashplate of his competition helicopter with a nylon gear train, yet retained the use of the metal final output gear. The result was a servo with zero backlash and virtually no deadband, but it could also track subtle command changes and hold them with precision.

The 8411SA features a “standard”-size case (.75 x 1.54 x 1.36 inches) that fits nearly anywhere and has 155 oz.-in. of torque. Its resolution of 5,900 steps per 120° and a less than 1 ms deadband provides high accuracy. It also incorporates an efficient digital amplifier which has only a slightly higher current drain (approximately 8% more than a conventional servo under a given load).

This new gear train wouldn’t tolerate the punishing momentary loads as a metal gear train would, but if used properly the plastic gears are quite suitable for most applications.

JR recommends the 8411SA for 1/80-size or smaller airplanes that would benefit from this kind of precision but don’t need metal-geared servos like precision Pattern airplanes.

Horizon Hobby Distributors: 4105 Fieldstone Rd., Champaign IL 61822; Tel.: (800) 338-4639; Web site: www.horizonhobby.com

Hot Wire Foam Tools

The AMA 2002 Convention offered the chance to use four new items from CST; they are a must if you work with foam.

The 12- x 14-inch Hot Scroll table ($49.95) is used for cutting accurate and straight edges, strips, angles, curves, cylinders, or cones. It also adjusts to make angle cuts.

The Hot Knife ($29.95) works like a combination handheld scroll saw and power drill. The blade is more than three inches long, made from steel, with a round shape that slices quickly and cleanly in any direction.

The Engraving Tool ($29.95) is for fine detailing and cuts holes five inches deep.

The Super Pro Sculpting Tool ($29.95) is the most unique of the bunch. It utilizes a stiff, five-inch, shapeable wire. Because the blade is shapeable, it is easy to cut almost any shape needed. (Requires the Pro Power Station, sold separately.)

Composite Structures Technology: Box 622, Tehachapi CA 93581; Tel.: (661) 822-4162; Fax: (661) 822-4121; Web site: www.csttools.com

Reproduction Ranger B

The Precision Motor Company originally produced the Ranger B engine in 1940. Because many have mistaken the Ranger B for a miniature Brown, it has become one of the rarest collectible engines.

The original Ranger B featured a bore of .690 with a stroke of .782, giving it a displacement of .295 cubic inch. Its operating range was 500-10,000 rpm.

Although it’s hard to find an original Ranger B, Woody Bartelt has reproductions available. In his quest to reproduce this engine, he has learned that only two are known to exist.

These Ranger B reproductions are handmade in every detail, assembled by an expert, and checked carefully at the factory, giving you the most accurate reproduction engines possible.

A large selection of reproduction engines are available, including the Yellow Jacket .061, the Fox .059, the Dooling .06, the Super Atom .098, and more.

Woody Bartelt: 3706 N. 3rd St., Galesburg MI 49053; Tel./Fax: (616) 665-9693; E-mail: aero-electric@worldnet.att.net

Transcribed from original scans by AI. Minor OCR errors may remain.