Free Flight: Indoor

HANGAR NEWS: The previous column may have been pessimistic about the use of Hangar #1 at Tustin, but the latest word is that the expected lease deal for the hangar fell through. So for now, the guys are still flying there regularly. Meanwhile, the hangar at Moffett Field, near San Francisco, is used for monthly sessions on the third Saturday each month. This hangar has problems, including a huge opening for truck access that has no door. The fliers are cautiously feeling out the hangar, learning when turbulence is less, etc. Indoor RC Electric Duration: Bob Wilder has done it again! On February 19, Bob upped the ante with a time of 48:09 at the Cat. I Bedford site. Is this guy unstoppable, or what? The airplane is his original design with 40-inch span, 250 sq. in. area, and weighs 110 grams. He used a DC5 West-Tek (?) coreless motor, 8:1 home-built gears and four 600 ma cells. The prop was a carbon-fiber 9 × 4.5 West Tek.

Free Flight: Indoor

ABOUT EIGHT MONTHS AGO chit-chat between Del Ogren and Roger Schroeder developed the concept of an Internet-based postal contest for the A-6 class. The A-6 class was proposed by Clarence Mather, and the San Diego Orbiteers club published the rules and began promoting the event. The first such contest is history, with excellent results, including an imposing international entry. Hats off to Del and Roger! The data below was taken from the Internet. Complete results are available from http:/n-lemma.com/indoor/. Contestant, Time, Adj Time (sec), Ht. Andrew Tagliafico, 6:40, 415, 47 John-Lenderman 6:36, 441, 47 Akihiro Danjo, 6:26, 400, 48.3 Mark Allison, 6:23, 398, 47 Lew Gitlow, 6:03, 378, 47 Emil Schutzel, 5:05, 334, 26.5

Free Flight: Indoor

NEW F1D RULES: Some drastic changes were made in the F1D event rules, to be effective after the 2000 Indoor World Championships. For those who haven't heard, minimum model weight was increased to 1.2 grams, maximum span was reduced to 55cm, and the rubber was limited to .5 gram. The proposal was generated by Andras Ree, a prominent Indoor flier from Hungary. He cited concerns over a worldwide decline in F1D participation, stating "Some of us are talking about the `freedom' of the present rules, but if you look on successful designs, nearly all are within, let's say, 10% of tolerances."

Free Flight: Indoor

TERRY JENKINS of Ontario, Canada wrote to mildly chastise me for "promoting Radio Controlled Indoor Flying." His well-taken point is that RC interests may well overwhelm all available Indoor sites, to the exclusion of "true" Indoor flying. This is a troubling possibility, but my not reporting this activity surely would have little impact on the site problem. There is no doubt that Indoor RC of any ilk is not compatible with other Indoor types. However, Indoor Electric FF, CO2 FF and Scale, all other Indoor Scale models except perhaps Lo-Cal, and P-24 models are equally incompatible with what I call "true" Indoor models. As fliers of duration models covered with microfilm or plastic, Jim Clem and I pay our pro rata share of site rental, and get (at most, on average) 50 minutes of flying time in return for a 70+ mile round trip.

Free Flight: Indoor

Joe Kehr believes he is enough of a newcomer to Indoor that his remarks can be considered to be objective, especially about F1D models. In response to the remarks Cezar Banks made in the January 1999 column, Joe suggests that the time for a change may be here, regardless of how attractive and slow-flying microfilm-covered models may be. Joe also supports the concept of moving to a 55cm span limit: "There are a handful of mainline model builders that wish to continue with the task of covering with microfilm . . . leave them to their bathtubs and hoops. However, consider those of us who would participate actively in the class if it didn't take years to develop the skill level . . . just to cover it. Handling manufactured film is difficult enough without the problem of finding microfilm solutions and flying sites which will accommodate their fragile nature.

Pages