Control Line Scale - 2004/01

REARWIN AIRPLANES was started in
mid-1928 by Rae Rearwin, who engaged
Fred Landgraf as a designer/engineer for the
production of the first Rearwin aircraft. The
venture was started because of the growing
enthusiasm for sport aviation after Charles
Lindbergh’s successful flight across the
Atlantic Ocean.

CONTROL LINE SCALE - 2001/05

cOnTROl line (CL) Team Scale has
been run at some local CL club meets for
several years. The Garden State Circle
Burners (GSCB) club in NJ has successfully
promoted the event at its annual all-scale
meet, using its own set of rules.
The event is offered to CL Scale builders
who would like to participate in the
sanctioned Scale competition, but are unable
to complete the flying portion. The inability
to fly the model is often caused by a
physical disability that precludes spinning in
a circle or enduring the model’s pull.
Based on experience and success of local
clubs, it was thought there might also be CL
Scale builders who would like to compete at the
national level, but are unable to fly their models.
Mike Welshans, vice president of the
National Association of Scale Aeromodelers
(NASA), and Chuck Meyers of the Queen
City U-Control Club (OH) informed me that
Team Scale will be offered at the 2001 Scale
Nationals, to be held July 6-8 at the national
flying site in Muncie IN. The event will be
sponsored by the Queen City U-Control Club.

CONTROL LINE SCALE - 2003/01

Dave DulaItIs (Sun City Center, Florida) is back this month
with his latest project: a Martin P4M Mercator. It is a unique
four-engine aircraft with two reciprocating engines and a pair of
turbojets in the rear of each piston-engine nacelle. The Mercator
was built for the US Navy as one of its attempts to gain the
benefit of high overtarget performance combined with longrange
capabilities with the mixed power-plant combination.
The P4M-1 prototype was ordered in July 1944, and the first
flight of this shoulder-wing monoplane with tricycle retractable
landing gear was made in 1946. The power plants were Pratt &
Whitney 2218 KW R-4360-4 Wasp Major radial engines and
3,825-pound-thrust Allison J33-A-17 turbojets in each nacelle.
All 19 of the Martin Mercator P4Ms, designated as patrol
bombers, served in the Navy Squadron VP-21.

CONTROL LINE SCALE - 2001/04

documenTaTion—or the lack of—for models entered in
competition was the main subject in the February 2001
column. I explored the importance of obtaining an up-to-date
copy of the AMA Competition Regulations and making
yourself aware of what is required for any Control Line (CL)
Scale event you enter.
I wrote about using the CL Sport Scale Worksheet (Part 1) as a
guide for presentation requirements, which would help you obtain
a good static score.
I also noted that I would explore what information and type of
layout might be provided within the eight-page maximum allowed
for model documentation in the Sport and Profile Scale events.
It’s important that the documentation presented contains data
that would satisfy all rule requirements and allow judges to fairly
and easily static-score a model.
The following is not only a review for the experienced Scale
modeler, but, more importantly, is for the modeler considering CL
Scale for the first time.

CONTROL LINE SCALE - 2001/03

davId dulaITIs, a frequent contributor
to the Control Line (CL) Scale column, has
moved from Chipley FL to Sun City Center
FL, and is back to building Scale models.
He has also joined the Tampa Bay Line
Flyers CL club. Members fly every Sunday
at the club field in St. Petersburg FL.
The group is short on Scale modelers,
but David hopes that his membership and
many CL Scale models will help promote
Scale building within the club. David sent
photos and information about the canopy
construction of his latest project—a Focke-
Wulf Fw 189 Uhu.
Jane’s Encyclopedia of Aviation tells
that the Uhu was produced and in service
between 1940 and 1944, and was used for
short-range reconnaissance. Armament was
four 7.9mm machine guns and two to four
50 kg bombs.
More than 800 Uhus were built; a
number of them were made for special
purposes, including radio training,
communications, and evacuation of
wounded. The extensive use of glazing on
the pilot’s cockpit and on the nacelle
between the twin tailbooms provided
excellent vision for the airplane’s crew.
David’s model is one-inch = one-foot
scale, with a wingspan of 60 inches, is
powered with two Fox .15 RC engines, and
weighs 4.2 pounds. David is one of those
rare Scale modelers who likes to build his
models on the light side. The only
operating feature is the throttle, which is
controlled via a standard three-line
bellcrank system.

Pages